The Phonebook in BeoTalk 1200 BeoTalk 1200 allows the user to record announcements with the phone
Entering phone numbers and recording names into the Phonebook
Press | The next free index number is shown |
numbers in the
The recording of an announcement with a phone number means that the name will be played when a call is received from this phone number. At the same time, the number will be shown in the display.
The phone number must have at least three and maximum 13 digits in order for an announcement to be attached.
Make a test recording to find the best speech intensity and distance to the microphone.
Note!
Remember to enter the area code when you store a phone number in the Phonebook. Otherwise Voice Announcement will not function.
Enter the phone number (including area code)
Press | to start recording |
Record the name | |
Press | to end the recording |
Continue with this procedure until you have entered and recorded the numbers and names desired – up to 50.
It is, however, technically possible to record up to 75 names, but this will reduce the time for announcements and messages to 13 minutes.
With 50 names in the Phonebook the time available is 15 minutes.
The display shows the time available
- - - - - - - - - - - -
The line in the display counts down the available recording time for the Voice Announcement
The numbers and names are stored in the order in which they were entered and recorded.
The first number is shown with index number 1, the next one with index number 2…
If the phone number has more than 10 digits, the index number will not be shown
23