Cabletron Systems 2700 Series manual Wall Mounting

Page 9

Installation

5

 

 

 

 

Wall Mounting

Your telephone is designed for GTE- and AT&T-type RJ11W wall jack mounting. If desired, the telephone can be converted for wall mounting by performing the following steps (refer to Figure 1):

1.When installed in the desk mode, unplug the line cord and remove the pedestal.

2.Reconfigure the handset cradle tab for wall installation by first removing the number designation strip with a paper clip to expose the tab. Rotate the tab and reinstall it into the housing.

3.Plug one end of the line cord into the LINE1 jack. Route the cord through the channel on the base. Plug the other end of the cord into the jack outlet on the wall.

2706 Caller ID Model:

†Plug in 9-volt power adapter.

†Route and secure cord in channel provided on the bottom of the phone.

4.Align the mounting holes on the base with the mounting posts on the jack outlet.

5.When the base is positioned onto the posts, move the phone down to secure the base to the jack outlet.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents
User Guide Life Support Applications Policy Contents Software Reset and Memory Initialization Important Safety Instructions Series Features Feature Telephone Checklist InstallationDesk Telephone Vodavi 2700-Series TelephoneWall Mounting Bottom of 2700-Series Telephones Data Jack LeadConnecting a Modem to Your Telephone Setting the VolumeRinger Volume Switch Handset Volume Speakerphone Volume SwitchDirectory Card Type RingerOperation Changing From Handset to SpeakerphoneHold 2702, 2703, 2706 models Hold 2704 and 2705 models Message Waiting IndicatorFlash Two-Line Models 2704/2705Last Number Redial MuteTo mute your voice while on a call To store a telephone number in memory Memory Dialing 2702, 2703, 2704, 2705 modelsTo clear a number from a speed button To dial a telephone number stored in memoryTo initiate a conference call Conferencing 2704/2705 modelsTo terminate a conference call To talk with only one party after establishing a conferenceTone/Pulse ProgrammingTo set the telephone to a different setting Flash TimingPause Timing Reset Positive DisconnectTo clear all data Before You Begin Caller ID Operation & ProgrammingCaller ID Displays General Caller ID InformationDate and Time Displayed Things You Should Know …Memory Dialing OperationTo Store a Number in Memory To Store a Number from Call HistoryPlacing a Display Call Marking a Call Caller ID OptionsRemoving Call Records from Call History Language Select ProgrammingHome Area Code Local 1 Area CodeLocal 2 Area Code Call History Caller ID with Call WaitingVisual Message Waiting Repeated CallsProgramming Functions Dial Mode SelectSpecial Ring Alert LCD ContrastPositive Disconnect Software Reset and Memory InitializationFlash Time Pause TimeCondition Suggestion Troubleshooting GuideSpeakerphone Does Not Regulatory Information Warranty Information Issue 2 August
Related manuals
Manual 36 pages 50.11 Kb