![](/images/new-backgrounds/1257468/25746837x1.webp)
Programming | 15 |
|
|
|
|
To terminate a conference, placing both lines on Hold:
1.Press the HOLD button.
2.The red Conference LED will extinguish; the LIU LEDs will illuminate steady red.
3.Both first and second parties will be placed on HOLD.
Programming
To program Caller ID model 2706, refer to the “Caller ID Operation & Programming ” section.
To enter programming mode:
1.The telephone line cord must be installed first. Lift the handset.
2.Press and hold the STORE button until a tone is heard.
3.You may now program the Tone/Pulse mode, Flash Timing, Pause Timing, or Positive Disconnect.
4.
Tone/Pulse
Default setting is TONE.
To set the telephone to PULSE:
1.After entering the programming mode, press [#].
2.A confirmation tone will be heard at the end of the program sequence.
To set the telephone back to TONE:
1.After entering the programming mode, press [*].
2.A confirmation tone will be heard at the end of the program sequence.