Binatone 5 manual Desk/Wall mount continue

Page 6

Desk/Wall mount continue...

Insert the rigid clips of the stand into the slots on the bottom of the phone (near the battery cover). Press down firmly until the flexible clips clicks into place.

To remove the stand, (1) pinch the flexible clips, (2) pull back the stand, and then (3) slide up and forward as shown below.

Mark two points on the wall that are 137mm apart to lay the fixing centers as shown below.

BE CAREFUL to check that there are no electrical wires hidden in the wall.

Fix two screws (supplied with the unit) at the marked locations, leaving approximately 7mm between the wall and the the screw head. Hang the cradle unit on the screws using the wall mount slots. You may need to remove the telephone from the wall and tighten the screws so that the cradle is securely fixed and does not wobble. Place the Handset on the cradle with the parking hook on the cradle arranged to fit in the parking recess under the earpiece on the Handset.

6

Image 6
Contents Page Page Page Installation Locating the Base unitInto a modular wall jack Desk/Wall mount installation Desk MountWall Mount Desk/Wall mount continue Setting up your phone Setting up continue Default, 300MS, or 600MS Default setting isContrast setting Press UP or Down button to select yourRinger volume To make a Call Telephone OperationTo answer a Telephone operation continue To end a callInserting a Pause in the dialing sequence Memory Storing aNumber Speed dialingOutgoing call record Into Outgoing call record continueStoring an PhonebookPhonebook function To view Phonebook Record To add a New record IntoPress Phonebook button again Phonebook function continue Press Phonebook button to confirm the edited name To delete aRecord from Wish to editCaller Display operation Caller Display listViewing the 1 Caller Display list To return a call Press Cancel buttonCaller Display operation continue With the phone on standby mode, press UP or Down buttonRecord 1 into the Phonebook Memory Press and hold Cancel buttonTo delete All Caller 1 Display records Storing a Caller DisplayCaller Display With CallWaiting Electrical safety Cleaning and careOperational notes Troubleshooting Troubleshooting continue PBX useTroubleshooting continue Guarantee and service While the unit is under GuaranteeAfter the Guarantee has expired Technical details Declaration of conformityContents of this User Guide 0845 345