Desk/Table Installation
For desk or table installation, use the
WARNING: Do not plug the handset cord into the line jack on the bottom of your telephone since it could damage your handset and the telephone.
1Plug one end of the line cord into the line jack on the top/rear of the telephone. See Figure 1 for the location of the line jack.
2Plug one end of the coiled handset cord into the handset jack on the side of the telephone. See Figure 1.
3Plug the other end of the handset cord into the handset.
4Hang up the handset.
5Plug the free end of the line cord into a modular jack.
6Lift the handset and listen for dial tone.
Note: When you have installed the telephone, you can set the ringer volume and ringer pitch as desired. (See Figure 1 for the location of the Ringer volume switch and the Ringer pitch control.)
7