Avaya 9600 manual Rtcpcont, Rtcpmonport, Rtpportlow, Rtpportrange, =Sip

Page 89

Administering Options for the 9600 Series SIP IP Telephones

Table 11: 9600 Series SIP IP Telephones Customizeable System Parameters (continued)

Parameter Name

Default

Description and Value Range

 

Value

 

RTCPCONT

1

Enables/disables the RTCP in parallel to RTP audio

 

 

streams. Values are 0=RTCP disabled, 1=RTCP

 

 

enabled.

RTCPMON

" " (Null)

RTCP Monitor IP or DNS address to be used as

 

 

destination for RTCP monitoring. Zero to 255 characters:

 

 

zero or one IP addresses in dotted decimal or DNS name

 

 

format. Note that this value is only set via SET command

 

 

in settings file if operating in a NON-Avaya environment,

 

 

otherwise this value is retrieved via PPM.

RTCPMONPORT

5005

RTCP monitor port number. TCP/UDP port to be used as

 

 

destination port for RTCP monitoring. Valid range is

 

 

0-65535. Note that this value is only set via SET

 

 

command in settings file if operating in a NON-Avaya

 

 

environment, otherwise this value is retrieved via PPM.

RTP_PORT_LOW

5004

Specifies lower limit of a port range to be used by RTP/

 

 

RTCP or SRTP/SRTCP connections, for example, to

 

 

adapt to firewall traversal policies. Values: 1024-65503.

RTP_PORT_RANGE

40

Specifies the width of the port range to be used by RTP/

 

 

RTCP or SRTP/SRTCP connections, for example, to

 

 

adapt to firewall traversal policies. The upper limit is

calculated by the value of RTP_PORT_LOW plus the value of RTP_PORT_RANGE, taking into consideration the overall limit of 65535. Values: 32-64511.

SCREENSAVERON

SEND_DTMF_ TYPE

SIG

SIG_PORT_LOW SIG_PORT_RANGE SIP_MODE

240Number of idle time minutes after which the screen saver is turned on. Valid values range from zero (disabled) to 999 minutes (16.65 hours).

2Defines whether DTMF tones are send in-band (regular audio) or out-band (negotiation and transmission of DTMF according to RFC 2833, with fallback to send in-band DTMF tones, if far end does not support RFC2833). Values are 1=in-band DTMF; 2=RFC2833 procedure.

0Parameter to allow to download during start-up the specific configuration sets for H323 or SIP endpoints. Valid values are:

0=Default

1=H323

2=SIP

1024 Lower limit of port range for signaling to support by the phone. Values range from 1024 to 65503.

64511 Port range for signaling to support by the phone. Values range from 32 to 64511.

0Determines whether the telephone uses a proxy to receive incoming calls or can receive calls directly from another telephone. Values are: 0=proxy mode, 1=peer-to-peer mode.

16 of 21

Issue 2 December 2007 89

Image 89
Contents Issue 2 December Security Introduction SIP Enablement Services SES Administration Telephone Software and Binary Files Appendix C Sample Station Forms 121 Index 135 About This Guide IntroductionIntroduction SIP Software Release Change HistoryRsvp VmonWhat’s New in SIP Software Release For more information, see Visiting User AdministrationWhat’s New in SIP Software Release Useexchangecalendar PHY1DUPLEX PHY2DUPLEX InterdigitdialingtimeoutdurationUseexchangecontacts Other Documentation Document OrganizationPage Series IP Telephones Administration Overview and RequirementsAdministration Overview and Requirements Quality of Service AdministrationIP Addresses Tagging and VlanLldp Dhcp Parameter Data PrecedenceAdministrative Checklist Administrative ProcessLAN Network RequirementsTelephone to Network Telephone to LLDP-Enabled NetworkTelephone Initialization Process Telephone and the SES Server Telephone to Dhcp ServerTelephone and File Server Error Conditions Page Hardware Requirements Network RequirementsNetwork Assessment Dhcp Server Server RequirementsNetwork Time Protocol NTP Server Required Network InformationHTTP/HTTPS Server Other Network Considerations Registration and AuthenticationIeee 802.1D and 802.1Q Reliability and PerformanceQoS Parameters in Real-Time Possible Values SIP Station Number PortabilityUDP TCP/UDP Port UtilizationTransmitted Packets Source = SIP IP Telephone UDP/TCPCNA RTP RangeSecurity Registration and Authentication Page Communication Manager Administrative Requirements Communication Manager AdministrationSwitch Compatibility Call Server RequirementsSystem-Level Preparation Tasks SIP Trunk AdministrationUDP Port Selection Call Routing AdministrationIP Interface and Addresses L2QSIG Rsvp and RTCP/SRTCPL2QVLAN Call Transfer Considerations Voice Mail IntegrationAuto Hold FNU Telephone AdministrationConferencing Call Considerations Call Forward CM/SIP IP Telephone Configuration Requirements CM/SIP IP Telephone Configuration Requirements Services SES Button Assignments Xxxxxx where Administering StationsAdministering Features Communication Manager Administration Using the Web Browser to Configure SES SIP Enablement Services SES AdministrationClick on Launch Administration Web Interface IntroductionClick Continue Dhcp and File Servers Server AdministrationSoftware Checklist Configuring Dhcp for 9600 Series SIP IP Telephones Dhcp Server AdministrationParameters Set by Dhcp Description Dhcp Generic Setup Option 51 Dhcp lease time Option 42 Sntp ServerOption 52 Overload Option, if desired Option 53 Dhcp message typeOption 59 Dhcp lease rebind time Windows NT 4.0 Dhcp Server Dhcpack Setting of System Values Set toSelect Start--Settings--Control Panel Define the Telephone IP Address Range Set the Subnet Mask Select Start--Programs--Admin Tools--DHCP ManagerSelect the Global parameter under Dhcp Options Click Edit ArraySelect Scope under Dhcp Options Activating the Leases Select Defaults from the DHCPOptions menuWindows 2000 Dhcp Server Select Start--Programs--Administrative Tools--DHCPCompleting the New Scope Wizard dialog box displays Change the Data Type to String Under Predefined Options and Values, click AddHttp Generic Setup Software Telephone Software and Binary FilesGeneral Download Process Series SIP IP Telephone Scripts and Binary Files Choosing the Right Binary File and Upgrade Script FileSettings File Upgrade Script FileContents of the Settings File SET Sntpsrvr 192.168.1.111 SET Gmtoffset -500 SET Dstoffset # END Group System ValueAdministering Options for the 9600 Series SIP IP Telephones Administering Telephone OptionsAgchead AgchandAgcspkr AudasysConfig Server CallfwddelayConfigserver CalltransferCountry USA SettingmodeCoverageaddr CurrentskinDOT1XSTAT DOT1XEAPS MD5Dscpaud DscpsigDefault ENABLEG722 ENABLEG711UENABLEG726 ENABLEG729Removaltimer EnablerediallistEnhdialstat ExchangeserverHttpexception InterdigittimeoutDomains HttpproxyLANG0STAT LldpenabledLanguages LocalloglevelLogos LogcategoryMediaencryption MsgnumMwisrvr MusicsrvrMycertcaid Mycertcn $SERIALNOMycertwait NodigitstimeoutOutbound SubscriptionPHY2PRIO PhnnumofsaPHY2VLAN PoeconssupportPPM PresenceserverProvideedited DialingProvideexchange QkloginstatCalendar Provide LogoutRtcpmon RtcpcontRtcpmonport RtpportlowSipportsecure SipsignalSipconferenceconti NUESnmpadd SkinsSnmpstring SpeakerstatTimeformat TcpkeepalivetimeTlssrvrid TrustcertsRegistrationtimer VutimerVumode WaitforWmlproxy Vlan ConsiderationsVlan Tagging Vlan Detection Vlan Default Value and Priority TaggingVlan Separation Vlan Separation Rules Then Ieee DNS Addressing802.1X Supplicant Operation 802.1X Pass-Through and Proxy LogoffAdministering Telephone Options Link Layer Discovery Protocol Lldp MAC / PHY BootnameTIA Lldp MED LLDP-MED TIA Lldp MEDSubtype = Parameter Name Impact Impact of TLVs on System Parameter ValuesSupport Visiting User AdministrationPoecons Emergency Number Administration Language Selection Enhanced Local Dialing Enhanced Local Dialing Enhanced Local Dialing Requirements Customizing Telephone Applications and Options Administering Applications and OptionsAdministering the WML Browser Avaya a Menu AdministrationAdministering Standard Avaya Menu Entries Avaya a Menu Administration Page Appendix a Glossary of Terms Channel MediaEncryption ProxyUnnamed SignalingRegistration VoIPPage Ietf Documents ITU Documents ISO/IEC, ANSI/IEEE Documents Appendix B Related DocumentationPage Station Options Appendix C Sample Station FormsStation Enhanced Call Forwarding Station Feature OptionsStation Site Data Station Feature Button AssignmentsAbbreviated Dialing Button AssignmentsService Observing FEATURE-RELATED System ParametersCall Center System Parameters EAS VectoringVlan IP Address MappingIP Network Region Media ParametersTCP Signaling Link Establishment for Avaya H.323 Endpoints Backup Servers in Priority Order Security ProceduresINTER-GATEWAY Alternate ROUTING/DIAL Plan Transparency Stations with OFF-PBX Telephone IntegrationTDD/TTY FAXCAC Igar WANNumbering PUBLIC/UNKNOWN Format CPNRtcp Monitor Server IP Dtmf Transmission ModeAutomatic Trace Route on Media Gateway IP EndpointFRL Class of RestrictionClass Restriction COR Optional Features IP Port Capacities Used Optional FeaturesID SID UsedATMS? ARS?DS1 MSP? System Parameters Customer-Options Optional Features screen Numerical Index108 Snmp
Related manuals
Manual 4 pages 45.27 Kb

9600 specifications

The Avaya 9600 series is a robust line of desktop phones designed to meet the needs of modern business communication. Tailored for users who require advanced functionalities, the 9600 series offers a rich set of features that enhance productivity and collaboration in the workplace.

One of the standout features of the Avaya 9600 series is its high-resolution graphical display. The intuitive interface with customizable menu options makes it easy for users to navigate through various functions and settings. The color screen enhances visibility and allows for clearer visual communication, essential for today’s fast-paced business environments.

In terms of audio quality, the Avaya 9600 series excels with high-definition voice technology. Users can benefit from crystal-clear audio, which minimizes misunderstandings during calls and enhances remote collaboration. The phones are equipped with full-duplex speakerphone functionality, ensuring that all parties can be heard clearly during conference calls.

Another significant characteristic of the Avaya 9600 series is its support for a wide range of communication protocols, including Voice over IP (VoIP) and SIP (Session Initiation Protocol). This versatility enables seamless integration with various communication systems, making the 9600 series suitable for companies of all sizes. The phones can connect to both cloud-based and on-premise solutions, allowing businesses to choose the best communication strategy for their needs.

User personalization is a key aspect of the 9600 series. The phones come with programmable function keys that allow users to customize their setup according to individual preferences and frequently used features. Additionally, the series supports Bluetooth and USB connectivity, enabling users to connect a variety of headsets and accessories for enhanced audio options.

Security is paramount in business communications, and the Avaya 9600 series addresses this with advanced security features. The phones support encryption protocols to protect sensitive information during calls, ensuring that businesses can communicate confidentially without the risk of eavesdropping.

Lastly, the Avaya 9600 series is designed for scalability. As organizations grow, the phones can easily be integrated into existing systems or expanded to accommodate additional users without requiring significant changes to the infrastructure.

In summary, the Avaya 9600 series is a powerful communication tool that combines advanced features, superior audio quality, and robust security to empower businesses. Its adaptability and user-friendly design make it a preferred choice for organizations aiming to enhance their communication efficiency and productivity.