Avaya 9600 manual Impact of TLVs on System Parameter Values, Parameter Name Impact

Page 104

Administering Telephone Options

Table 14: Impact of TLVs on System Parameter Values

System

TLV

 

Parameter Name

Name

Impact

 

 

 

PHY2VLAN

IEEE 802.1 Port

System value changed to the Port VLAN identifier in

 

VLAN ID

the TLV.

 

 

 

L2QVLAN and

IEEE 802.1 VLAN

The system value is changed to the TLV VLAN

L2Q

Name

Identifier. L2Q is set to 1 (ON).

 

 

A check is made as to whether a reset is necessary

 

 

to obtain a new IP address due to a change in the

 

 

values of the parameters L2Q or L2QVLAN.

 

 

VLAN Name TLV is ignored if:

 

 

the value of USE_DHCP is “0” and the value

 

 

of IPADD is not “0.0.0.0”, or

 

 

the current value of L2QVLAN was set by a

 

 

TIA LLDP MED Network Policy TLV, or

 

 

the VLAN name in the TLV does not contain

 

 

the substring “voice” in lower-case,

 

 

upper-case or mixed-case ASCII characters

 

 

anywhere in the VLAN Name.

L2Q,

TIA LLDP MED

L2Q - set to “2” (off) If T (the Tagged Flag) is set to

L2QVLANID,

Network Policy

0; set to “1” (on) if T is set to 1.

L2QAUD,

TLV

L2QVLAN - set to the VLAN ID in the TLV.

L2QSIG,

 

L2QAUD and L2QSIG - set to the Layer 2 Priority

DSCPAUD,

 

value in the TLV.

DSCPSIG

 

DSCPAUD and DSCPSIG - set to the DSCP value

 

 

in the TLV.

 

 

A check is made as to whether a reset is necessary

 

 

to obtain a new IP address due to a change in the

 

 

values of the parameters L2Q or L2QVLAN.

 

 

This TLV is ignored if:

 

 

the value of USE_DHCP is “0” and the value

 

 

of IPADD is not “0.0.0.0”, or

 

 

the Application Type is not 1 (Voice), or

 

 

the Unknown Policy Flag (U) is set to 1.

 

 

 

SIPPROXYSRVR

Proprietary Call

SIPPROXYSRVR will be set to the IP Address(es)

 

Server TLV

in this TLV value.

TLSSRVR and

Proprietary File

TLSSRVR and HTTPSRVR will be set to the IP

HTTPSRVR

Server TLV

Address(es) in this TLV value.

 

 

 

104 9600 Series SIP IP Telephones Administrator Guide SIP Release 2.0

Image 104
Contents Issue 2 December Security Introduction SIP Enablement Services SES Administration Telephone Software and Binary Files Appendix C Sample Station Forms 121 Index 135 Introduction About This GuideIntroduction Change History SIP Software ReleaseRsvp VmonFor more information, see Visiting User Administration What’s New in SIP Software ReleaseWhat’s New in SIP Software Release Useexchangecalendar PHY1DUPLEX PHY2DUPLEX InterdigitdialingtimeoutdurationUseexchangecontacts Document Organization Other DocumentationPage Administration Overview and Requirements Series IP TelephonesAdministration Overview and Requirements Administration Quality of ServiceIP Addresses Tagging and VlanParameter Data Precedence Lldp DhcpAdministrative Process Administrative ChecklistNetwork Requirements LANTelephone to Network Telephone to LLDP-Enabled NetworkTelephone Initialization Process Telephone and the SES Server Telephone to Dhcp ServerTelephone and File Server Error Conditions Page Hardware Requirements Network RequirementsNetwork Assessment Server Requirements Dhcp ServerNetwork Time Protocol NTP Server Required Network InformationHTTP/HTTPS Server Registration and Authentication Other Network ConsiderationsIeee 802.1D and 802.1Q Reliability and PerformanceQoS SIP Station Number Portability Parameters in Real-Time Possible ValuesTCP/UDP Port Utilization UDPUDP/TCP Transmitted Packets Source = SIP IP TelephoneRange CNA RTPSecurity Registration and Authentication Page Communication Manager Administration Communication Manager Administrative RequirementsSwitch Compatibility Call Server RequirementsSIP Trunk Administration System-Level Preparation TasksUDP Port Selection Call Routing AdministrationIP Interface and Addresses L2QSIG Rsvp and RTCP/SRTCPL2QVLAN Call Transfer Considerations Voice Mail IntegrationAuto Hold FNU Telephone AdministrationConferencing Call Considerations Call Forward CM/SIP IP Telephone Configuration Requirements CM/SIP IP Telephone Configuration Requirements Services SES Button Assignments Administering Stations Xxxxxx whereAdministering Features Communication Manager Administration SIP Enablement Services SES Administration Using the Web Browser to Configure SESClick on Launch Administration Web Interface IntroductionClick Continue Dhcp and File Servers Server AdministrationSoftware Checklist Dhcp Server Administration Configuring Dhcp for 9600 Series SIP IP TelephonesParameters Set by Dhcp Description Dhcp Generic Setup Option 42 Sntp Server Option 51 Dhcp lease timeOption 52 Overload Option, if desired Option 53 Dhcp message typeOption 59 Dhcp lease rebind time Windows NT 4.0 Dhcp Server Dhcpack Setting of System Values Set toSelect Start--Settings--Control Panel Select Start--Programs--Admin Tools--DHCP Manager Define the Telephone IP Address Range Set the Subnet MaskSelect the Global parameter under Dhcp Options Click Edit ArraySelect Scope under Dhcp Options Select Defaults from the DHCPOptions menu Activating the LeasesSelect Start--Programs--Administrative Tools--DHCP Windows 2000 Dhcp ServerCompleting the New Scope Wizard dialog box displays Under Predefined Options and Values, click Add Change the Data Type to StringHttp Generic Setup Software Telephone Software and Binary FilesGeneral Download Process Choosing the Right Binary File and Upgrade Script File Series SIP IP Telephone Scripts and Binary FilesUpgrade Script File Settings FileContents of the Settings File SET Sntpsrvr 192.168.1.111 SET Gmtoffset -500 SET Dstoffset Group System Value # ENDAdministering Telephone Options Administering Options for the 9600 Series SIP IP TelephonesAgchand AgcheadAgcspkr AudasysCallfwddelay Config ServerConfigserver CalltransferSettingmode Country USACoverageaddr CurrentskinDOT1XEAPS MD5 DOT1XSTATDscpaud DscpsigDefault ENABLEG711U ENABLEG722ENABLEG726 ENABLEG729Enablerediallist RemovaltimerEnhdialstat ExchangeserverInterdigittimeout HttpexceptionDomains HttpproxyLldpenabled LANG0STATLanguages LocalloglevelLogcategory LogosMediaencryption MsgnumMusicsrvr MwisrvrMycertcaid Mycertcn $SERIALNONodigitstimeout MycertwaitOutbound SubscriptionPhnnumofsa PHY2PRIOPHY2VLAN PoeconssupportPresenceserver PPMProvideedited DialingQkloginstat ProvideexchangeCalendar Provide LogoutRtcpcont RtcpmonRtcpmonport RtpportlowSipsignal SipportsecureSipconferenceconti NUESkins SnmpaddSnmpstring SpeakerstatTcpkeepalivetime TimeformatTlssrvrid TrustcertsVutimer RegistrationtimerVumode WaitforWmlproxy Vlan ConsiderationsVlan Tagging Vlan Default Value and Priority Tagging Vlan DetectionVlan Separation Vlan Separation Rules Then DNS Addressing Ieee802.1X Pass-Through and Proxy Logoff 802.1X Supplicant OperationAdministering Telephone Options Link Layer Discovery Protocol Lldp Bootname MAC / PHYTIA Lldp MED LLDP-MED TIA Lldp MEDSubtype = Impact of TLVs on System Parameter Values Parameter Name ImpactSupport Visiting User AdministrationPoecons Emergency Number Administration Language Selection Enhanced Local Dialing Enhanced Local Dialing Enhanced Local Dialing Requirements Administering Applications and Options Customizing Telephone Applications and OptionsAdministering the WML Browser Avaya a Menu AdministrationAdministering Standard Avaya Menu Entries Avaya a Menu Administration Page Appendix a Glossary of Terms Media ChannelEncryption ProxySignaling UnnamedRegistration VoIPPage Appendix B Related Documentation Ietf Documents ITU Documents ISO/IEC, ANSI/IEEE DocumentsPage Station Options Appendix C Sample Station FormsStation Station Feature Options Enhanced Call ForwardingStation Feature Button Assignments Station Site DataAbbreviated Dialing Button AssignmentsFEATURE-RELATED System Parameters Service ObservingCall Center System Parameters EAS VectoringIP Address Mapping VlanIP Network Region Media ParametersBackup Servers in Priority Order Security Procedures TCP Signaling Link Establishment for Avaya H.323 EndpointsINTER-GATEWAY Alternate ROUTING/DIAL Plan Transparency Stations with OFF-PBX Telephone IntegrationFAX TDD/TTYWAN CAC IgarNumbering PUBLIC/UNKNOWN Format CPNIP Dtmf Transmission Mode Rtcp Monitor ServerAutomatic Trace Route on Media Gateway IP EndpointClass of Restriction FRLClass Restriction COR Optional Features Optional Features IP Port Capacities UsedID SID UsedATMS? ARS?DS1 MSP? System Parameters Customer-Options Optional Features screen Index Numerical108 Snmp
Related manuals
Manual 4 pages 45.27 Kb

9600 specifications

The Avaya 9600 series is a robust line of desktop phones designed to meet the needs of modern business communication. Tailored for users who require advanced functionalities, the 9600 series offers a rich set of features that enhance productivity and collaboration in the workplace.

One of the standout features of the Avaya 9600 series is its high-resolution graphical display. The intuitive interface with customizable menu options makes it easy for users to navigate through various functions and settings. The color screen enhances visibility and allows for clearer visual communication, essential for today’s fast-paced business environments.

In terms of audio quality, the Avaya 9600 series excels with high-definition voice technology. Users can benefit from crystal-clear audio, which minimizes misunderstandings during calls and enhances remote collaboration. The phones are equipped with full-duplex speakerphone functionality, ensuring that all parties can be heard clearly during conference calls.

Another significant characteristic of the Avaya 9600 series is its support for a wide range of communication protocols, including Voice over IP (VoIP) and SIP (Session Initiation Protocol). This versatility enables seamless integration with various communication systems, making the 9600 series suitable for companies of all sizes. The phones can connect to both cloud-based and on-premise solutions, allowing businesses to choose the best communication strategy for their needs.

User personalization is a key aspect of the 9600 series. The phones come with programmable function keys that allow users to customize their setup according to individual preferences and frequently used features. Additionally, the series supports Bluetooth and USB connectivity, enabling users to connect a variety of headsets and accessories for enhanced audio options.

Security is paramount in business communications, and the Avaya 9600 series addresses this with advanced security features. The phones support encryption protocols to protect sensitive information during calls, ensuring that businesses can communicate confidentially without the risk of eavesdropping.

Lastly, the Avaya 9600 series is designed for scalability. As organizations grow, the phones can easily be integrated into existing systems or expanded to accommodate additional users without requiring significant changes to the infrastructure.

In summary, the Avaya 9600 series is a powerful communication tool that combines advanced features, superior audio quality, and robust security to empower businesses. Its adaptability and user-friendly design make it a preferred choice for organizations aiming to enhance their communication efficiency and productivity.