Avaya Inc. | Desktop Charger, Dual Charger, and Quad Charger User Guide |
Battery Packs
Overview The WT will need to have its Battery Pack recharged periodically. The Nickel Metal Hydride (NiMH) rechargeable WT Battery Pack gives you four hours of talk time or 80 hours of
Indications of low The WT will notify you when the charge on the Battery Pack is battery low by displaying the battery icon. If you are in a call you will hear a soft beep through the earpiece every thirty seconds. The
user has
Not in call: The message Low Battery and a loud beep indicate a critically low Battery Pack charge. These occur when the user is not in a call. The WT will not work until the Battery Pack is charged.
Caution: Take care not to short the battery contacts on the Battery Pack with metal objects such as coins, keys or paper clips. Shorting the contacts can cause permanent damage.
3616, 3620 Battery Pack removal and replacement
To remove, press down on the latch on the Battery Pack on the back of the WT. The Battery Pack releases outward.
To replace, slide the lip of the Battery Pack into the bottom of the cavity. Push the top of the Battery Pack until it snaps into place. You should not have to force it against the WT.
3626 To remove, hold the handset in one hand with the keypad facing Battery Pack up. Press both Battery Pack release buttons (on the left and right removal and sides of the handset) at the same time. The Battery Pack will replacement release downward. You may catch it with the palm of your other
hand. If the Battery Pack does not release, gently shake the handset while pressing both release buttons. Do not pry.
To replace, slide the Battery Pack straight into the cavity until it snaps into place. You should not have to force it against the WT.
Changing the Battery If you are using the Telephony Gateway in your telephone Pack while in a call system the Battery Pack may be changed while the call is still in
progress. Do not press End Call on the WT. Quickly remove the discharged Battery Pack and replace with a charged Battery Pack, then press Power On to turn the WT back on. Press Start Call to resume the call in progress.
Battery Pack note Battery Packs are not interchangeable. The 3626 WT uses the distinctive square model BPX100 Battery Pack. The Battery Packs for the 3616 and 3620 WTs are the same rounded shape but different colors. The 3616 model BPE100 Battery Pack is black; the 3620 model BPN100 Battery Pack is steel blue.
Important:
•Only use Avaya Battery Packs with Avaya WTs.
| Page 21 |