Avaya Inc. | Desktop Charger, Dual Charger, and Quad Charger User Guide |
Quad Chargers
Quad Charger | Quad Charger |
Model GCN100 | Model GCX100 |
(shown with four empty charging bays) | (shown with two empty charging bays) |
Overview The Quad Charger is designed to simultaneously charge four Nickel Metal Hydride (NiMH) Battery Packs. Model GCX100 is designed to charge the BPX100 Battery Pack for the 3626 WT. Model GCN100 is designed to charge the BPN100 Battery Pack in the 3620 WT. Full charging is accomplished in approximately one and a half hours.
Power supply Set up the Quad Charger by first obtaining the appropriate AVAYA electrical supply for the country or region. Place the Quad Charger on a flat, horizontal surface and plug the power supply into the Quad Charger and into an appropriate wall outlet.
Removing and To remove the Battery Pack from the 3626 WT, hold handset in replacing a Battery one hand with the keypad facing up. Press both battery release
Pack buttons on the left and right sides of the handset at the same time. The Battery Pack will release downward. You may catch it with the palm of your other hand. If the Battery Pack does not release, gently shake the handset while pressing both release buttons. Do not pry.
Remove the Battery Pack from the 3620 WT by pressing down on the latch on the Battery Pack on the back of the WT. The Battery Pack releases outward.
Insert the Battery Pack into one of the four charging bays so that the Battery Pack contacts meet the charging bay contacts. The LED above the charging bay will turn on to indicate that charging is in progress. Complete charging occurs in one and a half to two hours.
When charging is complete, the LED will turn off. Lift the Battery Pack out of the charging bay.
Blinking LED If the LED starts blinking as soon as the Battery Pack is inserted, the Battery Pack may be improperly seated. Lift it out and reinsert. If the LED continues to blink or starts blinking at any time during the charging process, it indicates that there is a problem with the Battery Pack that makes it unusable. Do not continue to charge the Battery Pack. Dispose of it properly and do not attempt to use it in the WT. Do not attempt to open or repair a defective Battery Pack. Contact your service representative for assistance.
| Page 27 |