Avaya Inc. | Desktop Charger, Dual Charger, and Quad Charger User Guide |
Desktop Chargers
3616 WT | 3626 WT |
In DCE100 Desktop Charger | in DCX100 Desktop Charger |
Overview The Desktop Charger is a
Full charging is accomplished in approximately one and a half hours.
Set up the Desktop Charger by first obtaining the appropriate Avaya power supply for the country or region. Place the Desktop Charger on a flat, horizontal surface. Plug the power supply into the Desktop Charger and into an appropriate wall outlet.
The user must end any call in progress by pressing the End Call button on the WT before placing the handset into the Desktop Charger. The WT may be off or in standby mode during charging.
Indicator light Place the WT into the Desktop Charger slot facing forward. If the WT is placed correctly, the red indicator light will come on. The indicator light will not come on when the slot is empty, when the WT is improperly seated, or when the Desktop Charger has no power applied.
Charging indicator While the WT is charging in standby mode, it will display its extension number and Charging…. The battery icon will
show charging progress. The handset is fully operational and will ring if called. When the WT is charging while turned off, only Charging… will display and no calls will be received. The dots will be racing during the charging cycle. It is normal for the Battery Pack to become warm when charging.
| Page 23 |