Additional handset functions
Enter the old code. This should be 0000, if it has not already been changed.
3The display shows NEW CODE then ✱ ✱ ✱ ✱. Enter the new code. When the 4th digit has been entered, the display returns to standby.
To register a handset to more than one base station
Use ‘The customised method’ on page 8 to register a handset with up to 4 DECT base stations.
A handset registered to more than one base station will stay ‘linked up’ to its current base station as long as it is in range of it. As the handset moves out of range, it will ‘link up’ with the next base station it comes into range of.
To prioritise a base station
You can set a handset to give priority to a particular base station, so that it will always link up to that base station first if it is in range.
1Press OK then 7 on the handset, then use the ▲ and ▼ buttons to select the base station number you want to prioritise.
PQ | |
7 | R |
| S |
2Press OK to confirm your choice.
A small square in the display indicates that no base station is prioritised.
23