BT DECTfax manual Paging a handset, Find Handset

Page 26

Additional handset functions

Paging a handset

If you want to hail a handset or find out where it is is, you can page it from the base station.

To page a handset from the base station

1At the base station, press Function then

Transfer. The base station display will show

HANDSET NUMBER.

2On the keypad, enter the handset number

(1-4) that you want to contact. If you want to contact all the handsets at the same time, press the ✱ button. The display will show

FIND HANDSET.

eg

AB
2	C

or

✱

3The base station will beep, and the handset(s) you are contacting will ring.

4At the handset being contacted, the display will show a flashing INTERCOM icon and the handset will ring.

26

Image 26

Contents DECTfax Additional Handset User guidePage This guide Introduction For your recordsEquipment Charging the handset Registering the handset Simple method Setting up Using your handset Switching the handset on and offMaking and receiving calls Handset on LineTo receive a call Answering mode Earpiece volumeSecrecy Last number redialRing melody and volume Using the handset directory To change a stored number To display the telephone number To display the reference number Keypad tones Call timer Additional functions To register a handset to more than one base station Transferring calls Handset NumberTransferring a call from one handset to another Paging a handset Find HandsetCall Monitor Solution Setting up IndexAdditional functions Offices in Europe, North America, Japan and Asia Pacific