Using the answering machine

To adjust playback

volume

Press + to increase the volume.

Press - to decrease the volume.

As you press, a beep sounds at the level you have selected. When the volume is at its highest or lowest, you will hear two beeps.

Beep!

If you adjust the

volume during playback, the beep does not sound, but the volume changes accordingly.

If you set the volume below mid-level, it will automatically return to its middle setting when any buttons are pressed on the answering machine. The volume is unaffected during remote access or call screening.

To record your

outgoing message

The outgoing message is the message a caller hears when your Response 125 answers a call.

The Response 125 has

apre-recorded outgoing message which announces...

Hello, your call cannot

be taken at the moment, so please leave your message after the tone.

You can record your own outgoing message to replace the pre-recorded message. If you record your own message, the pre-recorded message will automatically be removed and stored in the memory in case you wish to reinstate it.

Your Response 125 has a total recording capacity of 14 minutes. Any outgoing message you record can be up to 2 minutes long, but you should keep it short to allow more time for recording incoming calls.