Time saver
Your Response 125 is pre- set to TIME SAVER. This means that during remote access, if any messages have been recorded your Response 125 will answer after only 2 rings. If there are no messages, it will answer after 6 rings, thereby allowing you the option of hanging up before your Response 125 answers, to avoid paying for the call.
1Press and hold down the ANSWER ON/OFF button. Your Response 125 will announce the current answer delay setting.
Time Saver
2Keep holding down the ANSWER ON/OFF button. Your Response 125 announces the answer delay options...
Time Saver,
2,3,4,5,6,7,8,9
When you hear the setting you want, release the ANSWER ON/OFF button. After 2 seconds the new answer delay setting is announced, before your Response 125 returns to ‘answer on’ mode.
Answer delay,
4 rings
To receive incoming
messages
Your Response 125 will automatically record an incoming message when it is connected to your phone socket and is set to ‘answer on’.
When your Response 125 has received new messages, the display light flashes.
Two minutes is the maximum time available for each incoming message. If the maximum
SkipSkip
message length is reached, your Response 125 announces “Thank you for calling” and disconnects the line. If the memory is full, then it will announce, “Memory full, thank you for calling” and disconnects the line.
Your Response 125 has a recording capacity of up to 14 minutes. If the recording memory is full, the LED flashes rapidly and your answering machine will not record further messages.
To play back
messages
Press the PLAY button. Your Response 125 announces
15