Boss Audio Systems BR-900CD owner manual Copying Data Track Copy, Copying the repeated portion AB

Editing the Performance on a Track (Track Editing)

The BR-900CD allows you to edit your songs by performing editing functions such as copying and moving data recorded on the tracks.

About the Measure/Time Specification screen

Measures and time are specified in the “S” (Start), “E”

(End), and “T” (To) screens in Track Edit as shown

below.

fig.02-301d

	S (Start) / E (End) / T (To)
(Ex.)	Measure Beat

Hours	Seconds		Sub Frame
Minutes		Frame

Data is saved in its edited form when you return to the Play screen from the Track Edit screen.

*During automatic updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

To copy, move, or erase repeated portions, you first need to set the portion to be repeated, using the procedure described on p. 51.

Copying Data (Track Copy)

Track Copy allows you to copy a specific part of data and then place it in a different location.

You can perform editing operations such as copying the data on a track all at once, or copying the data from a specified part as many times as you wish.

If, for example, you want to use a phrase from a certain track, or have the same phrase repeated again and again, the copy function will help save you time.

*If data exists at the position being copied to, that data will be overwritten.

*The portion being copied must be longer than 1.0 seconds long. If the copied portion is 1.0 seconds or less, no sound will be heard even if the copy is carried out.

The three types of Track Copy are given below.

Copying the repeated portion (AB)

Perform the procedure given below to copy the portion from

the repeat start (A) to the repeat end (B).

Ex. 1: Copying twice to the same track

fig.02-302

Repeat	Repeat TO	Time
Start (A)	End (B)

Ex. 2: Copying twice to another track

fig.02-303

Repeat	Repeat TO	Time
Start (A)	End (B)

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “TRK,”

and press [ENTER].

fig.02-304d

3.Press CURSOR [ ] [ ] to move the cursor to “CPY,”

and press [ENTER].

fig.02-305d

Section 2

67