Boss Audio Systems BR-900CD Selecting the Song to Record, Recording a new song Song New

Recording/Playing Back a Song

4.To continue with the initializing, press [ENTER] (YES). To cancel the operation, press [EXIT] (NO) (or [UTILITY]).

When [ENTER] (YES) is pressed, initializing begins. When the initializing has been completed, “Completed!” appears in the display.

“Keep power on! Song creating...” then appears in the display, and a new song is automatically created.

In this case, the data type selected is HiFi (MT2). When creation of the song is finished, the play screen returns to the display.

*Depending on the capacity of the memory card, initializing may take more than ten minutes to complete. This is not a malfunction. The progress of the initializing is shown in the display. Do not turn off the BR-900CD until the initializing has been completed.

Do not remove the memory card or turn off the BR-900CD while the display shows “Keep power on!” Doing so can destroy the data on the memory card and/or render the memory card itself unusable.

(3) Selecting the Song to Record

When the memory card contains more than one song, the song that was recorded last is automatically selected.

To record a new song, follow the procedure given below.

Recording a new song (Song New)

About data types

When you record a new song, the BR-900CD allows you to set the data type. This enables you to select the combination of audio quality and recording time that is most suitable for the material you are recording. The following data types can be selected.

* The data type of a song cannot be changed after it is created.

HiFi (MT2) (multitrack 2):

For high-quality recordings. This data type is recommended when you will be doing a lot of track bouncing. Normally you should select this type. Use this type for most of your recordings.

STD (LV1) (live 1):

For recordings that will take longer than what can be provided with the MT2 data type. This is the most suitable setting for recording live performances.

LONG (LV2) (live 2):

Of the three data types, this provides the longest recording time. This is convenient when the card has little recording capacity.

Recording time

The recording times possible for each data type on one memory card are given below (when recording one track).

Data type	Recording time (times approximate)
	HiFi (MT2)	STD (LV1)	LONG (LV2)
32 MB	16 min.	19 min.	24 min.
64 MB	32 min.	39 min.	49 min.
128 MB	65 min.	78 min.	98 min.
256 MB	130 min.	156 min.	196 min.
512 MB	260 min.	312 min.	392 min.
1 GB	520 min.	624 min.	784 min.

*The recording times shown above are approximate. Depending on the number of songs, the allowable recording time may decrease.

*The recording times shown above are for when only one track is used. For example, if you record on all eight tracks, the recording time for each track will be 1/8th of the time shown above.

*The CompactFlash memory cards supported by your BR- 900CD are 32 MB to 1 GB CompactFlash cards for use with a 3.3 V power supply voltage.

32