Boss Audio Systems BR-900CD Canceling an Operation Undo/Redo, Reversing the Last Operation Undo

Canceling an Operation (Undo/Redo)

Occasionally when the recording you make may not turn out as you wish, or the settings you make for an editing operation are incorrect, and you want to reverse what you have done. At these times, you can use the “Undo function.”

The Undo function reverses the action you have just performed and returns you to the status you were in beforehand. To reverse an Undo, you must use the “Redo function.”

For example, suppose you are punching in to loop record and record over the same location twice. To undo the recording you just performed and return to the first recording, you would use the Undo function.

To then reverse the Undo and return to the condition that you were in immediately after the second recording, you would use the Redo function.

*After you have performed an Undo, you can only perform a Redo (you cannot perform an Undo again).

*If you record something, or carry out Track Edit after performing an Undo, it will no longer be possible to perform a Redo.

*Undos only affect audio data recorded to the tracks. You cannot undo changes made to parameter settings, or data other than audio data.

*Keep in mind that the history of all operations you’ve carried out with respect to the recorded data will be cleared as soon as you carry out a Song Optimize (p. 78). This means that once you execute Song Optimize, you’ll no longer be able to perform an undo.

Reversing the Last Operation (Undo)

1.Press [UNDO/REDO].

“UNDO?” appears.

fig.01-401d

2.To execute Undo, press [ENTER] (YES).

Press [ENTER] to reverse the last performed recording or editing operation.

If you decide not to Undo, press [EXIT] (NO).

Canceling the Undo (Redo)

To reverse the Undo you just executed, perform a Redo.

1.Press [UNDO/REDO].

“REDO?” appears.

fig.01-402d

2.To execute Redo, press [ENTER] (YES). The Undo you just performed is reversed.

If you decide not to Redo, press [EXIT] (NO).

Section 1

57