Using the Insert Effects

Saving Insert Effects Settings (Write)

Follow the procedure below to enter a name (patch name) for an effect that you’ve modified, and save it as a new effect patch.

*You cannot save an effect patch during the recording or playback of a song.

*If you do not need to change patch name, go to step 4.

1.At the Effect screen, press CURSOR [ ] to move the cursor to “NAME,” and press [ENTER].

The Patch Name Setting screen appears.

5.Turn the TIME/VALUE dial to select the number to which to write the new effect patch.

6.After you’ve selected the destination, press [ENTER]. After the save has been completed, you are returned to the Effect screen.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

2.Use [CURSOR] and the TIME/VALUE dial to enter the patch name.

* Press [ENTER] to switch between uppercase and lowercase.

3.After you have completed entering the effect settings and patch name as desired, press [EXIT] to return to the Effect screen.

4.Press CURSOR [ ] [ ] to move the cursor to “WRITE,” and press [ENTER].

86

Page 86
Image 86
Boss Audio Systems BR-900CD owner manual Saving Insert Effects Settings Write