Boss Audio Systems BR-900CD owner manual Selecting the Recording Track

Recording

Selecting the Recording Track

1.Press either [1]–[7/8] at REC TRACK to select the recording track.

If the button flashes in red, that track is ready for recording.

The status of each track can be determined from the indicator on the button.

Off: No recorded data exists on the track.

Green: Recorded data exists on track.

Red: The track is selected for recording.

If a track with existing data is selected for recording, the indicator will light alternately in orange and green.

If INPUT SELECT [GUITAR/BASS/MIC2] or [MIC] are lit

or

Since the input is mono, the recording is normally performed as a mono recording onto one track. Press one of TRACK [1]– [6] at REC TRACK to select the one track to which to record.

However, if you want to record in stereo to increase the effect of insert effects, you can simultaneously press the [1] and [2],

[3]and [4], or [5] and [6], REC TRACK buttons for stereo recording onto two tracks.

In addition, Tracks 7/8 are stereo tracks, so they always produce stereo recordings.

(Recording in Mono)

(Recording in Stereo)

If INPUT SELECT [LINE] or [SIMUL] are lit

or

Since the input is stereo, the recording is normally performed on two tracks. Press either REC TRACK [1] or [2] to select tracks 1 and 2, or [3] or [4] to select tracks 3 and 4.

However, if you want to mix together the left and right channels being input onto one track, with tracks 1 and 2 selected, press REC TRACK [1] again to select track 1. Using the same procedure, you can select any track 1 to 6 to be the track to which to record.

In addition, Tracks 7/8 are stereo tracks, so they always produce stereo recordings.

48