68
Editing the Performance on a Track (Track Editing)
4. Turn the TIME/VALUE dial to select “AB” and press
[ENTER].
fig.02-306d
5. Use CURSOR [ ] [ ] and the TIME/VALUE dial to
select the track/V-Track to copy from, and track/V-
Track to copy to.
6. Press [ENTER].
fig.02-307d
7. Use [CURSOR] and turn the TIME/VALUE dial to
specify the time of the beginning of the location “T”
(To) where you want the copied data to be placed.
8. Press [ENTER].
fig.02-308d
9. Turn the TIME/VALUE dial to select the number of
copies you want to be placed.
10.When you are ready to execute the copy, press
[ENTER].
The display will ask “Are you sure?,” so that you can
confirm the operation.
11.Press [ENTER].
The copy is executed.
12.Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.
Copying by specifying the time
(TME/MES)
Perform the procedure given below to copy the portion
between specific times.
Ex. 1: Copying twice to the same track
fig.02-309
Ex. 2: Copying twice to another track
fig.02-310
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “TRK,”
and press [ENTER].
fig.02-311d
3. Press CURSOR [ ] [ ] to move the cursor to “CPY,”
and press [ENTER].
fig.02-312d
4. Turn the TIME/VALUE dial to select “TME/MES” and
press [ENTER].
START END TO Time
START END TO Time