Boss Audio Systems BR-900CD Editing Insert Effect Settings, Press Effects, Select an effect patch

Using the Insert Effects

Editing Insert Effect Settings

If you wish to create a new effect sound, you should first select an existing patch that is closest to the sound you want, and then edit its settings. If you wish to save the effect settings that you edited, save them as a user patch or song patch.

1.Press [EFFECTS].

The Effect screen appears.

fig.01-503d

P: Preset / S: Song / U: User

By pressing [ENTER] while the cursor is at a Bank–Number,

you can display the Edit Effect screen directly.

4.Press CURSOR [ ] [ ] to move the cursor to each effect and turn the TIME/VALUE dial to turn each

effect on or off.

Blocks that are turned on are shown in uppercase letters, while blocks that are turned off are shown in lowercase letters.

Algorithm	Bank	Number	Patch Name
Name

Turn on the effects that you want to use.

fig.01-506d

Section 3

2.Select an effect patch.

Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the bank, Preset/Song/User, and patch number.

3.Press CURSOR [ ] to move the cursor to “EDIT,” and press [ENTER].

The Edit Effect screen appears and the algorithm (the

connection sequence for the effects being used) is displayed.

fig.01-504d

5.Press CURSOR [ ] [ ] to move the cursor to the effect with the parameter that you want to change and

press [ENTER].

The Parameter Setting screen for each effect appears.

fig.01-507d

6.Use CURSOR [ ] [ ] to select a parameter, and turn the TIME/VALUE dial to edit the value.

7.If you would like to edit another effect, press [EXIT] to return to the previous screen, and repeat steps 5–6.

8.If you wish to save the current effect settings, perform the procedure described in “Saving insert effect settings,” next.

■When effect patches in the SIMUL bank are selected, “GTR” and “MIC” appear.

Move the cursor to “GTR” to modify a guitar-use effect, or to “MIC” to modify an effect for use with a mic, then

press [ENTER].

fig.01-505d

Edited effect settings are temporary. If you exit the Edit Effect screen without saving the effect patch you changed, “TMP” appears next to the indication of the bank.

Be aware that if you select a new effect patch while “TMP” is displayed, the altered effect patch is returned to its original settings and the changes are lost.

85