Boss Audio Systems BR-900CD Adjusting the tone Track EQ, What is a loop effect?, Press PAN/EQ

Recording/Playing Back a Song

Adjusting the tone (Track EQ)

“Track EQ” is an independent two-band equalizer featured on each track that allows you to adjust the high- and low- frequency tonal qualities separately.

1.Press [PAN/EQ].

fig.00-435a

2.Press CURSOR [ ] [ ] to move the cursor to “EQ,” and press [ENTER].

The EQ settings screen appears.

fig.00-435d

3.Press CURSOR [ ] [ ] and turn the TIME/VALUE dial to turn each Track EQ on or off.

*Pressing a REC TRACK button moves the cursor to the track corresponding to the button pressed.

4.When changing the EQ settings, press CURSOR [ ] repeatedly to display the parameter screen, then use the [CURSOR] and the TIME/VALUE dial to change the

setting’s value.

fig.00-436d

For more on the settings content, refer to “Track EQ

Parameter Functions” (p. 112).

5.When you have finished making the settings, press [EXIT] (or [PAN/EQ]) to return to the Play screen.

Adding width to the sound (Loop Effect)

The BR-900CD features chorus, delay, and doubling (any one of these three can be selected at any one time) as loop effects, and includes reverb as well. Effective use of these allows you to add greater breadth to the sound.

What is a loop effect?

Effects connected to the send and return of mixer effects are called “loop effects.” You can adjust the depth of the effect by changing the send level of each mixer channel (equivalent to the tracks of the BR-900CD).

Since the send levels for each track are separate, you can change the depth individually. This allows you to, for example, have a deep reverb on the vocals and slight reverb on the drums, or any such combination.

Opposed to insert effects (p. 35), which are applied to specific sounds, loop effects are applied to the complete track.

*You cannot use chorus, delay, and doubling simultaneously. Any one may be selected while loop effects are in use.

1.Press [LOOP EFFECTS].

fig.00-437a

2.Press CURSOR [ ] [ ] to move the cursor to “CHO/

DLY” or “REV,” and press [ENTER].

fig.00-437d

3.Press CURSOR [ ] [ ] until “FX Type” or “Type” is displayed, then turn the TIME/VALUE dial to select the

loop effect.

Quick Start

43