Boss Audio Systems BR-900CD owner manual Used According to the Mode, Track 1-8, 1&2, 3&4, 5&6, 7&8

Using the Insert Effects

Changing How the Insert Effects are	INPUT<REC DRY>:
Used According to the Mode	The sound is monitored through the insert effect but is
	recorded without the effect (dry).

By default, the insert effect is inserted immediately after the input source. The reason for this is to allow for the effects- processed (wet) sound to be recorded and monitored. However, sometimes you want to change the connection order.

On the BR-900CD, you can accommodate a wide variety of situations by changing the point to which the insert effects are connected.

Follow the procedure below to change where insert effects are connected.

1.Press [EFFECTS].

2.Press CURSOR [ ] [ ] to move the cursor to

“LOCAT,” and press [ENTER].

fig.01-510d

fig.01-512

TRACK 1

(REC)

TRACK 1–8, 1&2, 3&4, 5&6, 7&8:

The insert effect can be applied to the playback of a track (or pair of tracks). Use this when you wish to try out effects after recording the dry sound, or when you wish to apply effects only to a specific track.

fig.01-513

TRACK 1

(PLAY)

Section 3

3.Turn the TIME/VALUE dial to switch the point to which the insert effects are connected.

INPUT<NORMAL>:

The sound is monitored and recorded after it passes through the insert effect. Normally you will use the BR- 900CD with this setting.

fig.01-511

TRACK 1

(REC)

RHYTHM:

The insert effect can be applied to the playback of a Rhythm.

fig.01-513a

RHYTHM

MASTER:

Use this when you wish to apply effects to the entire song, such as when adjusting the tone or applying a special effect during mixdown.

fig.01-514

TRACK 1

(PLAY)

TRACK 2

(PLAY)

TRACK 8

(PLAY)

RHYTHM

4.Press [EXIT] to return to the Play screen.

*During updating, “Keep power on!” appears in the upper line of the display, while the lower line shows what is being processed.

87