Boss Audio Systems BR-900CD Inserting a Step, Erasing a Step, Naming Arrangements, 124

Creating Original Arrangements

Inserting a Step

Perform the procedure below to insert a new step into the location of the present step.

Verse

Insert

Step 1	Step 2	Step 3
Intro	Verse	Fill
	Step 2	Step 3	Step 4
Step 1
Intro	Verse	Verse	Fill

*The parameter value of inserted step will be the same as of the targeted step.

1.Make sure performance of the song is stopped, then press [ARRANGE/PATTERN/OFF] repeatedly until the indicator is lit.

2.Press [EDIT].

The Arrangement Edit screen appears.

3.Press [CURSOR] to move the cursor to “STEP,” and press [ENTER].

The Recording Standby screen appears.

4.Use [CURSOR] and the TIME/VALUE dial to set the location (step) where the data is to be inserted.

5.Press CURSOR [ ] repeatedly to move the cursor to “INSERT” and press [ENTER].

To cancel the operation, press CURSOR [ ] to return to the Arrangement Edit screen.

When you press [ENTER], the display indicate “Insert!” then return to the Recording Standby screen.

Erasing a Step

This erases the content of the currently selected step. The content of the following steps are brought forward to fill the erased step.

Step 1	Step 2	Step 3		Step 4
Intro	Verse	Fill		Verse
			Erase
Step 1	Step 2	Step 3
Intro	Verse	Verse

* No further data can be deleted when only Step 1 remains.

1.Make sure performance of the song is stopped, then press [ARRANGE/PATTERN/OFF] repeatedly until the indicator is lit.

2.Press [EDIT].

The Arrangement Edit screen appears.

3.Press [CURSOR] to move the cursor to “STEP,” and press [ENTER].

The Recording Standby screen appears.

4.Use [CURSOR] and the TIME/VALUE dial to set the step to be erased.

5.Press CURSOR [ ] repeatedly to move the cursor to “ERASE” and press [ENTER].

To cancel the operation, press CURSOR [ ] repeatedly to return to the Arrangement Edit screen.

When you press [ENTER], the display indicate “Erase!” then return to the Recording Standby screen.

Naming Arrangements

You can edit the name of the currently selected arrangement.

* You can use up to eight characters in naming arrangements.

1.Press [ARRANGE/PATTERN/OFF] repeatedly until the indicator is lit.

2.Press [EDIT].

3.Press CURSOR [ ] repeatedly to move the cursor to “NAME,” and press [ENTER].

The Change Arrangement Name screen appears.

* You cannot change Preset arrangement names.

124