Boss Audio Systems BR-900CD owner manual Rear Panel

Panel Descriptions

Rear Panel

13	12		9	8	7	6	5	4	3	2	1
		11	10
14

1.GUITAR/BASS jack

High-impedance input jack to directly connect your guitar or

bass.

2.MIC2 jack (XLR types)

These jack allows a mic to be connected. XLR jack is provided.

The BR-900CD can supply phantom power to a condenser microphone connected to this connector (p. 191).

*If the connection has been made to the GUITAR/BASS and the MIC2 jacks, the GUITAR/BASS jack is given priority.

8.FOOT SW/EXP PEDAL jack

This is an input jack for connecting a separately sold foot switch (BOSS FS-5U, Roland DP-2) or expression pedal (BOSS Roland EV-5, BOSS FV-300L).

By using this FOOT SW jack, you can start/stop playback, punch in/out, and more.

When an expression pedal is used, you can control the depth of insert effects with your foot.

“Using a Foot Switch or Expression Pedal” (p. 187)

3.MIC1 jacks (TRS/XLR types)

These jacks allow a mic to be connected. Both standard TRS jacks (p. 26) and XLR jacks are provided.

The BR-900CD can supply phantom power to a condenser microphone connected to this connector (p. 191).

*If microphones are connected to both jacks, the TRS jack is given priority.

9.MIDI OUT connector

Connector for sending MIDI data.Connect it to the MIDI IN connector of an external MIDI device (rhythm machine or sound module).

10. POWER switch

This is the power switch. It turns the power of the BR-900CD on/off.

4.LINE IN jacks

These are input jacks for analog audio signals.These jacks are used to connect CD players and other audio devices and keyboards, rhythm machines, and other external sound modules.

5.LINE OUT jacks

These are output jacks for the analog audio signal. You can connect tape recorders, or other recording devices to record the output analog signal from the BR-900CD.

6.DIGITAL OUT connector

Optical connector for outputting digital audio signals. The same sound that is output from LINE OUT is also output from DIGITAL OUT. You can connect a DAT recorder or CD recorder to this connector and make digital recordings of the BR-900CD’s output.

11. DC IN (AC Adaptor) jack

Connect the supplied AC adaptor (PSC-series) to this jack.

You must use only the PSC-series AC adaptor. Use of any other adaptor may cause overheating or malfunctions.

12. Cord Hook

Wrap the cable around this hook so that the AC adaptor cable is not pulled out accidentally.

*If the AC adaptor is disconnected during operation, your important recorded data may be lost.

13. Security Slot ( )

http://www.kensington.com/

7.USB connector

This is the connector for connecting your computer to the BR- 900CD with a USB cable.

22