Recording/Playing Back a Song

(1) Preparing the Memory Card

The BR-900CD writes the recorded data directly to the inserted memory card. Therefore, for recording or playback, the memory card must be inserted.

“Memory Cards Supported by Your BR-900CD” (p. 16)

Inserting the memory card

Before inserting the memory card (CompactFlash), be sure to first turn off the BR-900CD. If a memory card is inserted when the power is turned on, the data in the memory card may be destroyed, or the memory card may become unusable.

1.Insert the memory card into the memory card slot. The supplied memory card still has some remaining space; however, for extended recording, you will need to erase some of the demo song or prepare a new memory card (64 MB or greater is recommended).

*The demo songs are protected.

To delete the demo songs, first remove the protections, then carry out the deletion.

“Protecting a Song (Song Protect)” (p. 79) “Erasing Songs (Song Erase)” (p. 77)

(2) Turning On the Power

Use the procedure described in “Turning On the Power” (p. 28).

Formatting the memory card (Initialize)

*This is not necessary for memory cards that have already been used with the BR-900CD.

Newly purchased memory cards, or memory cards that have been used previously with a computer will need to be prepared so they can be used with the BR-900CD.

Carry out the following steps in the order given to complete the procedure (this preparation process is called “Initializing”).

fig.00-401

1 4

2,3,4 2,3

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “INI,”

and press [ENTER].

fig.00-402d

3.Press CURSOR [ ] [ ] to move the cursor to “CARD,” and press [ENTER].

“Are you sure?” appears.

fig.00-403d

Quick Start

31

Page 31
Image 31
Boss Audio Systems BR-900CD Preparing the Memory Card, Formatting the memory card Initialize, Inserting the memory card