Boss Audio Systems BR-900CD Using the Loop Effects/Track EQ, Selecting the Loop Effect, Doubling

Using the Loop Effects/Track EQ

Here is an explanation of how to change the various	When using REV
parameters for the loop effects (chorus/delay/doubling/	Select either “HALL” or “ROOM.”
reverb).
For an explanation of loop effects, refer to “Loop Effect
Parameter Functions” (p. 111).
Loop effects do not have “patches.” Loop effect settings are	4. To change the settings for the selected effect, press
saved along with the song data.
If you want to save the settings in the currently selected song,	CURSOR [ ] [ ] to select the parameter and turn the
hold down [STOP], and press [REC].	TIME/VALUE dial to change the set value.

Selecting the Loop Effect

*You cannot use the chorus, delay, and doubling effects together. You must choose only one.

1.Press [LOOP EFFECTS].

2.Press CURSOR [ ] [ ] to move the cursor to “CHO/ DLY” or “REV,” and press [ENTER].

For a description of the parameters for each effect, refer to

“Loop Effect Parameter Functions” (p. 111).

5.When you finish making settings,

press [EXIT] repeatedly to return to the PLAY screen.

3.Press CURSOR [ ] [ ] until “FX Type” or “Type” is displayed, then turn the TIME/VALUE dial to select the

loop effect.

When using CHO/DLY

Select from “CHORUS,” “DELAY,” or “DBLN” (doubling).

Doubling

When you want to spread out the guitar backing sound to the left and right, record the same guitar backing separately to two tracks, then pan the sounds to the left and right. This is known as “doubling.”

By using the “DBLN” loop effect, you can produce a doubling effect even from a single-track (mono) recording, allowing you to make more efficient use of the tracks.

*If you want to emphasize the doubling effect, pan the track completely to the right or to the left and increase the doubling effect level. In addition, use the following procedure to raise the send level.

108