Boss Audio Systems BR-900CD owner manual Changing the current position, Elapsed time display

Listening to a Demo Song

In addition to the procedures given above, you can also change your current position in the song using the procedures given below.

Changing the current position

Elapsed time display

The value given at “TIME” in the display shows the elapsed time into the song using MTC (MIDI time codes) and is expressed as follows: hours-minutes-seconds-frames-sub frames.

The time code specifications can differ depending on the device. To synchronize operation with another device using MTC, you will first need to match the time code specifications of both devices. At the factory settings, one second is set to 30 frames (non-drop) (p. 158).

Moving to the start of a play

To move to the time where the first sound of a song is recorded, press and hold [STOP] and press [REW].

Each V-Track of the selected track is checked and you move to the time of the first recorded sound for the song.

Press [ZERO] to move to the time location 00:00:00-00.0.

Moving to the end of a play

To move to the time where the last sound of a song is recorded, press and hold [STOP] and press [FF].

Each V-Track of the selected track is checked and you move to the time of the last recorded sound for the song.

TIME
00:00:00-00.0			23:59:59-29.9
		Section of the song recorded
			[	STOP] + [FF]
[ZERO]	[STOP] + [REW]

Moving through a song using hours, minutes, seconds, frames, or sub frames

Press [ ] [ ] to move the cursor to hours, minutes, seconds, frames, or sub-frames display, and turn the TIME/ VALUE dial to change the current time in the song.

Moving through a song in measures or beats

The current position’s measure– beat–clock are displayed at the location “MEAS” (measure) in the display.

*For the demo songs, a Arrangement (p. 37, p. 120) has already been created and it is set so that measure, beat, clock, and song is properly synchronized.

Press [ ] [ ] to move the cursor to “measure” or “beat” display, and turn the TIME/VALUE dial to change the current measure or beat in the song.

* You cannot move the cursor to Clock (cannot be altered).

30