Boss Audio Systems BR-900CD owner manual Using the BR-864 / BR-532’s Data, 183

With Macintosh

Using the BR-864 / BR-532’s Data

You can use the BR-900CD to play BR-864 / BR-532 data.

*First be sure to back up the BR-864 / BR-532’s “ROLAND” folder to the computer.

1.Initializing the memory card on the BR-900CD (p. 196).

2.Connect your computer and the BR-900CD with a USB cable.

3.Confirm that the recorder is stopped, then press [UTILITY].

4.Press CURSOR [ ] [ ] to move the cursor to “USB,” and press [ENTER].

The USB screen appears.

5.Select “BACKUP” with the TIME/VALUE dial, then press [ENTER].

The Idling screen appears in the display.

fig.06-110ad

*You cannot carry out the following procedure unless the Idling screen is displayed. Refer to p. 212 for instructions on resolving this problem.

The “BOSS_BR-900” icon is added to the computer.

fig.06-107

(Ex.)

BOSS_BR-900

6.Delete the BR-900CD “ROLAND” folder.

1)Double-click the “BOSS_BR-900” icon, and delete the “ROLAND” folder.

7.Drag the previously backed up BR-864 / BR-532 “ROLAND” folder to the “BOSS_BR-900” icon and drop it there.

fig.06-110bd

When you have finished backing up the data, the Idling screen returns to the display.

8.Quit the connection to the computer.

1)Drag the “BOSS_BR-900” icon into the trash.

9.Press the BR-900CD’s [EXIT].

The USB screen returns to the display.

*If you press [EXIT] without quitting the connection to the computer, the following screens appear. In this case, pressing

[ENTER] returns the USB screen to the display.

fig.06-106ad

10.When backup of the data is complete, press [EXIT] to return to the Play screen.

At this point, you can safely disconnect the USB cable from the BR-900CD and the computer.

Section 7

183