Loading Songs Created with the BR-864/BR-532

You can load songs created with the BR-864 or BR-532 into

the BR-900CD via memory cards.

Loading Songs Created with the BR-864

First, save the song data created with the BR-864 to a memory card, then insert the memory card into the BR- 900CD.

Once you record, edit, or set parameters for imported BR-864 song data, that particular song data can no longer be used by the BR-864.

To protect against accidental recording or editing, song protect (p. 79) is automatically switched on for imported BR- 864 song data.

If you can accept the fact that you will no longer be able to use the song data with the BR-864, you can switch song protect off, then carry out recording or editing.

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “SEL,” and press [ENTER].

The Song Select screen is appeared.

The song protect icon ( ) is indicated for the BR-864 songs.

3.Rotate the TIME/VALUE dial to select the song to be loaded.

4.Press [ENTER].

The song data is loaded.

Patches employing the “Guitar Synth” algorithm of the BR- 864 are replaced by “P001” when loaded.

The “Harmonist” of the BR-864 are replaced by “Flanger” when loaded.

To record or edit, turn off song protect (p. 79).

When you turn off song protect, “Overwrite OK?” appears in the display; press [ENTER] (YES). Song protect is switched off, and the data is simultaneously converted to BR-900CD format. After this step is executed, the song data can no longer be used with the BR-864.

Loading Songs Created with the BR-532

When copying song data created with the BR-532 from SmartMedia to a BR-900CD memory card, you can load the data as a BR-900CD song.

Reading BR-532 data requires a PC with a SmartMedia reader and CompactFlash writer connected.

First, copy the data on the BR-532 memory card (SmartMedia) to the PC with the SmartMedia reader, and use the CompactFlash writer to copy that data from the PC to a BR-900CD memory card.

Then insert the memory card containing the copy of the desired data into the BR-900CD.

1.Press [UTILITY].

2.Press CURSOR [ ] [ ] to move the cursor to “SEL,” and press [ENTER].

The Song Select screen is appeared.

3.Rotate the TIME/VALUE dial to select the song to be loaded.

4.Press [ENTER].

The song data is loaded.

The data remains in BR-532 format immediately after loading. Once the loaded song is saved, the data is converted (p. 79) to BR-900CD format.

Section 1

61

Page 61
Image 61
Boss Audio Systems BR-900CD owner manual Loading Songs Created with the BR-864, Loading Songs Created with the BR-532