Boss Audio Systems BR-900CD owner manual Using Insert Effects, Adjusting the input sensitivity

Recording/Playing Back a Song

Adjusting the input sensitivity

When input from GUITAR/BASS/MIC2 or MIC1 is selected, adjust their input sensitivity with the relevant SENS knob.

fig.00-412a

In order to record at a good sound level, you should adjust the input levels so that the PEAK indicator lights momentarily when a guitar is strummed strongly or vocals are sung loudly.

Adjusting the input level

Adjust the volume of the input source for recording.

1.Lower the MASTER fader.

2.Turn the INPUT LEVEL knob to its center position and

then slowly increase the MASTER fader.

ig.00-421b

At this time, use the INPUT LEVEL knob to adjust the input level so that the level changes in the -12 (between -24 and -6)–0 dB range of the “IN” level meter.

The volume level is adjusted with the MASTER fader and INPUT LEVEL knobs.

Level meter display

This shows the volume levels for each track.

fig.00-413d

IN:

The level meter shows the input from INPUT.

1–8:

The level meter shows the output of Tracks 1–8.

RHYTHM:

The level meter shows the output of Rhythm.

LR:

The Level meter shows the post-MASTER fader output level. When monitoring the sound with headphones, use the MASTER fader to adjust the volume to the level you desire.

(5) Using Insert Effects

The BR-900CD comes with five onboard effects processors: an insert effect, loop effects, track EQ, pitch correction and mastering tool kit. Below is an explanation of the operations related to the insert effects.

What is an insert effect?

An effect added directly to a specific signal (with the BR- 900CD, this refers to the instrumental sounds from an INPUT jack) is called an “insert effect.” The effect pedals that a guitarist connects between his guitar and amp are a type of insert effect. Loop effects, on the other hand, are effects connected to the send/return jack of mixers and other similar devices. (refer to p. 43)

Switch effect patches

The BR-900CD provides numerous effects for vocals, guitar, etc., and two or more of these effects can be used simultaneously. Such a combination of effects (i.e., the types of the effects used and the order in which they are connected) is called an “algorithm.”

Each effect in an algorithm offers a certain number of parameters, which allow the sound to be altered (similar to tweaking the knobs on a stomp pedal). The algorithm and its parameter settings are bundled into units called “effect patches.”

By changing the effect patch, you can simultaneously change the stored effect combinations, their on/off status, and the parameter settings, and completely change the sound.

1.Press [EFFECTS] to display the currently selected effect

patch.

fig.00-414d

	P: Preset / S: Song / U: User
Algorithm	Bank	Number Patch Name
Name

Your BR-900CD allows you to automatically select the most suitable “banks” by pressing an INPUT SELECT button.

For example, pressing the [GUITAR/BASS/MIC2] INPUT SELECT button changes you to a guitar bank patch, and pressing [LINE] changes you to a line bank patch.

Banks are a collection of effect patches.

Quick Start

35