Boss Audio Systems BR-900CD owner manual With Macintosh, 107

With Macintosh

Backing Up the BR-900CD’s Data

1.Connect your computer and the BR-900CD with a USB cable.

2.Confirm that the recorder is stopped, then press [UTILITY].

3.Press CURSOR [ ] [ ] to move the cursor to “USB,” and press [ENTER].

The USB screen appears.

4.Select “BACKUP” with the TIME/VALUE dial, then press [ENTER].

The Idling screen appears in the display.

fig.06-106d

*You cannot carry out the following procedure unless the Idling screen is displayed. Refer to p. 212 for instructions on resolving this problem.

The “BOSS_BR-900” icon is added to the computer.

fig.06-107

(Ex.)

BOSS_BR-900

5.Back up the data.

1)Double-click the “BOSS_BR-900” icon.

2)Drag the “ROLAND” folder to the computer’s

folder and drop it in the folder.

fig.06-109d

When you have finished backing up the data, the Idling screen returns to the display.

Reading backup data back into the BR-900CD from

PC (Recover)

When restoring data backed up on a computer to the BR- 900CD, drag the “ROLAND” folder to the “BOSS_BR- 900” icon and drop it there (overwriting it).

6.Quit the connection to the computer.

1)Drag the “BOSS_BR-900” icon into the trash.

7.Press the BR-900CD’s [EXIT].

The USB screen returns to the display.

*If you press [EXIT] without quitting the connection to the computer, the following screens appear. In this case, pressing

[ENTER] returns the USB screen to the display.

fig.06-106ad

8.When backup of the data is complete, press [EXIT] to return to the Play screen.

At this point, you can safely disconnect the USB cable from the BR-900CD and the computer.

Section 7

175