Boss Audio Systems BR-900CD owner manual Using the CD-R/RW Drive to Exchange Data, 146

Using the CD-R/RW Drive to Exchange Data

6.Use the TIME/VALUE dial to select the song you want to back up, and press [ENTER].

The Write Speed screen will appear.

7.Use the TIME/VALUE dial to set the write speed, and press [ENTER].

The message “Write sure?” will appear.

•The range of available write speeds can sometimes be limited by the type of media being used. In such a case, the BR-900CD will allow you to select only the supported speeds.

•If you are using CD-R or CD-RW discs intended for high- speed writing, the frequency of write errors may increase if the x2 or x4 speed is selected. It is recommended that you use the x8 speed for high-speed discs.

8.Press [ENTER] (YES).

Writing to the CD-R/RW disc will begin.

When the message “Completed!” appears, it indicates that the backup has been successfully completed.

Saving all of the songs on a memory card to a CD-R/RW disc (All Backup)

1.Insert an empty CD-R/RW disc into the BR-900CD’s CD-R/RW drive.

The drive’s access indicator will begin to flash. Wait until this indicator stops flashing and turns off before proceeding.

2.Press [CD-R/RW].

The CD menu screen will appear.

3.Press CURSOR [ ] [ ] to move the cursor to “DATA,” and press [ENTER].

The Data CD menu screen will appear.

4.Press CURSOR [ ] [ ] to move the cursor to “BACKUP,” and press [ENTER].

The Backup menu screen will appear.

5.Press CURSOR [ ] [ ] to move the cursor to “ALL,” and press [ENTER].

The Write Speed screen will appear.

6.Use the TIME/VALUE dial to set the write speed, and press [ENTER].

The message “Are you sure?” will appear.

•The range of available write speeds can sometimes be limited by the type of media being used. In such a case, the BR-900CD will allow you to select only the supported speeds.

•If you are using CD-R or CD-RW discs intended for high- speed writing, the frequency of write errors may increase if the x2 or x4 speed is selected. It is recommended that you use the x8 speed for high-speed discs.

7.Press [ENTER] (YES).

Writing to the CD-R/RW disc will begin.

When the message “Completed!” appears, it indicates that the backup has been successfully completed.

146