Boss Audio Systems BR-900CD Error Messages Not Available in Mastering Mode, Not Blank Disc, 215

Error Messages

Not Available in Mastering Mode!

Cause:	You cannot carry out this operation with
	“MASTERING” selected as the recording mode.
Solution:	First press the [REC MODE] button to switch
	the recording mode to “INPUT” or “BOUNCE,”
	then proceed with the operation.

Not Blank Disc!

Cause:	The CD-R/RW disc already has data written to it.
Solution:	Place a CD-R/RW disc with no data written to it
	(a blank disc) in the CD-R/RW drive.
	If using a CD-RW disc, you can erase the data on
	the disc in order to create a blank disc (p. 153).

Not CD-RW Disc!

Cause:	The disc is not a CD-R/RW disc, so the data
	cannot be erased.
Solution:	Use a CD-RW disc.

Not Finalized Disc!

Cause:	The disc cannot be played back properly
	because it has not been finalized.
Solution:	Finalize the disc (p. 143).

Power Down!

Cause:	Internal power source voltage is below than
	guaranteed workable range.
Solution:	In case of using PSC adaptor:
	Cable might be broken or adaptor itself might
	be malfunctioning. Please contact Roland
	Service or Roland authorized dealers.
	In case of using batteries:
	Please replace with new batteries (p. 23).

Protected!

Cause:	You are attempting to write data to a song that
	has protection switched on.
Solution:	To write data to the song, switch Protect to OFF
	(p. 79).

Set Bounce Target to Track!

Cause:	You cannot use the Rhythm-related functions
	(switching Arrangement/Pattern/Off, editing,
	switching Rhythm pads, Tone Load) when a
	CD is specified as the bounce destination.
Solution:	When using Rhythms, specify a track as the
	bounce destination.

Set the Repeat!

Cause:	Repeat A (Starting Point) and B (Ending Point)
	is not set.
Solution:	Set the Repeat A and B (p. 51).

Stop P.Trainer!

Cause:	The operation you attempted cannot be done
	while the Phrase Trainer (p. 192) is operating.
Solution:	Press [PHRASE TRAINER] to turn off the
	Phrase Trainer.

Stop Recorder!

Cause:	The operation you attempted cannot be done
	while the recorder is running (playing or
	recording).
Solution:	Press [STOP] to stop playback or recording.

Too Many Songs!

Cause:	You are attempting to create more that 100 songs.
Solution:	Erase unneeded songs (p. 77).

Unformatted!

Cause: The Memory card is not formatted by DOS.

Solution 1: Turn off the BR-900CD, properly insert the memory card, then turn the BR-900CD back on.

Solution 2: Initialize the card (p. 196).

Unsupported Card!

Cause:	The memory card (CompactFlash) or
	MicroDrive inserted is not compatible with the
	BR-900CD.
Solution:	Use a memory card compatible with the BR-
	900CD (32 MB to 1 GB CompactFlash with a
	power-source voltage of 3.3 V).

Unsupported Format!

Cause 1: The BR-900CD cannot recognize or use the format of the inserted memory card.

Solution 1: Insert a memory card initialized for use with the BR-900CD (p. 196).

Cause 2: You have attempted to load an incompatible WAV or AIFF file or SMF to the BR-900CD.

Solution 2: Check the format of the WAV or AIFF file or SMF.

Use AC Adaptor!

Cause:	You have attempted to use the CD-R/RW drive
	while running on battery power.
Solution:	You cannot use the CD-R/RW drive while the
	BR-900CD is powered by the batteries. If you
	want to use the CD-R/RW drive, first save the
	song, turn off the power to the BR-900CD,
	connect the AC adaptor, then turn the power
	back on.

Wrong Disc!

Cause:	A disc other than the required CD-R/RW disc
	is placed in the drive.
Solution:	Place a CD-R/RW disc in the drive.

Section 9

215