Ameriphone manual Setting up Your XL-30, Accessing the Battery

		E
Setting up Your XL-30
		N
		G
		L
There are five steps involved in	To install new battery:	I
setting up your XL-30.	1. Slide open the battery	S
• Insert one 9 Volt alkaline	compartment cover on the	H
battery for extra bright ring	bottom of the telephone,
flasher (optional).	(Figure 3).
• Decide if you want the phone	2. Install one fresh battery, and
to sit on a desk or hang on the
	reinstall the cover.
wall.
• Connect the telephone
components.
	Setting the Dialing Mode
• Program up to to 12 telephone
numbers to call with the press	Set the dial mode switch to T (tone) if
of a memory button.
	you have touch tone service. Set the
• Set up special features
	switch to P (pulse) if you have rotary
	dialing.
Installing the Backup Batteries
To add extra brightness to the	Connecting for Desk or Wall Mount
XL-30’s ring flasher when you	Desktop Use
receive calls, install one 9 Volt
	1. Connect the telephone line
alkaline battery (not included).
	cord and the handset cord to
	the telephone as shown in
	Figure 4.
Insert 9V	2. Lift the handset and listen for
battery
here	a dial tone.
Press in
here	The phone is ready to use.
to open
battery
compartment

Figure 3 - Accessing the Battery 4