Setting up Your XL-30 (continued)
Line cord
handset 
(curly) cord
Figure 4 - Connecting the Components
For Wall Mounting
1.Pull the handset hook out as shown in Figure 5 and reverse its position so that the hook points up and will hold the handset when you hang up.
Figure 5 - Reversing the Hook
2.Insert the tabs of the phone base into the slots in the
lower position of the base as shown in Figure 6. Push the mounting bracket in and down firmly until it snaps into place.
MANUAL
AUTO
Figure 6 - Mounting Bracket for Wall Mounting
3.Locate a desired wall phone jack and hold phone upright.
4.Plug in the short phone line cord and mount the phone as shown in Figure 7.
Short phone line cord
MANUAL
AUTO
Figure 7 - Wall mounting installation
5