Ameriphone manual Using Your XL-30, Incoming Voice Volume

Setting up Your XL-30 (continued)

5.Angle the phone downward to feel for the LOWER protruding nail head. Insert the WALL JACK'S nail head into the LOWER part of the phone's mounting bracket.

6.Once the lower nail head has been inserted, insert the UPPER nail head into the phone's bracket and slide the phone down until it is firmly in place on the wall.

7.Once firmly in place, attach the short line cord to the phone and attach the phone's handset.

8.Lift the handset and listen for a dial tone. The phone is now ready to use.

	E
Using Your XL-30
	N
	G
	L
Incoming Voice Volume	I

S

You can adjust the volume of	H
incoming calls by simply sliding
the VOL control. This gives you up
to 18 dB. more volume. If you
want more amplification, follow
the directions below.

1.Press the AMPLIFY button as shown in Figure 8 to turn the incoming voice amplifier ON or OFF. When AMPLIFY is on, the AMPLIFY indicator light comes on.

HOLD	PROG	FLASH	REDIAL
TONE		AMPLIFY	VOL
		HI

Figure 8 - AMPLIFY Button and Indicator

2.Adjust the volume in the ear piece by moving the VOL slide control in Figure 9. With AMPLIFY ON incoming volume will be up to 30dB louder.

HOLD	PROG	FLASH	REDIAL
TONE		AMPLIFY	VOL
	LO	HI

Figure 9 - Volume Slide Control 6