IPS-2000 Series User’s Manual/使用手冊
[Step 2 Network Setting]
IPS-2000 Series support the IVR (Interactive Voice Response) system that allows the customers to configure the IPS-2000 Series easily. Please follow the instruction below to set IP numbers.
1）Set IP, press #112 XXX*XXX*XXX*XXX#
2）Set Mask IP, press #113 XXX*XXX*XXX*XXX#
3）Set Gateway IP, press #114 XXX*XXX*XXX*XXX#
4）Set DNS Server, press #115 XXX*XXX*XXX*XXX#
Example:
Network default mode of IPS-2000 series is DHCP mode. If you want to or should use Fixed IP address, please follow by step 2 to configure IPS-2000 series. If you need to change the static IP number to 192.168.1.12, follow the instruction given and enter #112192*168*1*12#, once the IPS-2000 Series reboot, the setting is completed. Users are able to set the IPS-2000 Series to DHCP function, by picking up the phone or putting it on speakerphone mode, follow the instruction and enter #111#. After the system reboot, it will automatically picks up an IP number.
[Step3 Registration and Log on]
After startup is completed, pick up the phone or put it on a speakerphone mode, enter #126#.Untill you are able to listen to IVR, please input the IP address in the Web page, and add the port number“9999＂at the end of IP address, as: http://IPS-2000 Series IP:9999 (Example: if your IPS-2000 Series IP address is 192.168.1.100, then input http://192.168.1.100:9999) , then you will log on to the web page shown below. For login , please input Username as “root＂ , and Password as“test＂, you can configure all the setting.(The username “root＂ and password “test＂are for initial log on only, customers can change the setting anytime.)
When you get into the Web Management interface, move the cursor to the SIP setting panel, click on the
14
