ArtDio IPS-2000 user manual Forward Setting

Page 21

IPS-2000 Series User’s Manual/使用手冊

Drop Prefix

Default to “No”.

 

- No (Add): When the dialing pattern matched, add to dialing number as a

 

prefix.

 

- Yes (Replace): When the dialing pattern matched, replace matched dialing

 

number.

Replace rule1 ~ 4

Set dial plan criteria

 

+: OR, multiple patterns can be separated with “+” which represents “OR”

 

x: represents 1 digit, xxx represent 3 digits

Auto Dial Time

Set waiting how many seconds to dial out after entered all phone number

 

digits without enter the “#”sign.

3.2.5 Forward Setting

To configure the settings of the Forward Setting.

Forward Setting

Field Name

Description

 

 

All Forward

Always forward. Every call will be forwarded to the telephone number in the

“All Fwd No.”-“URL” field.

 

Busy Forward

If a call comes in when line is busy, call will be forwarded to the telephone

number in the “Busy Fwd No.”-“URL” field.

 

No Answer Forward

If a call comes in with no answer after certain of rings, call will be forward to

the telephone number in the “No Answer Fwd No.”-“URL” filed.

 

All Fwd No

Enter the name and telephone number for forwarding.

Busy Fwd No

Enter the name and telephone number for forwarding when line is busy.

 

 

No Answer Fwd No

Enter the name and telephone number for forwarding when no answer.

 

 

No Answer Fwd Time

Set how many rings before a call times out.

Out

 

21

Image 21
Contents IPS-2000 Series User’s manual/使用手冊 IPS-2000 Series User’s Manual/使用手冊 Safety InstructionsContents IPS-2000 Series User’s Manual/使用手冊 產品介紹 產品規格 常見問題與排解(Q&A) Vertical Panel Image Flat Panel Image IPS-2000 Series User’s Manual/使用手冊 Product IntroductionPage Page Pstn Suggestion Environment SettingISP Environment Suggestions General settingQuick Startup and Registration Guide Status LED Indicator ExplanationNetwork Setting IVR Interface for IPS-2000 Series IPS-2000 Series User’s Manual/ 使用手冊 Inbound FunctionIPS-2000 Series Inbound Steps Inbound Operation Phone Setting IPS-2000 Series User’s Manual/使用手冊 Web ConfigurationInformation Caller IDPhone Book Auto AnswerPhone Book Field Name Description Field Name Description Dial Plan SettingForward Setting Call Waiting DND SettingFlash Time Setting Volume SettingVoIP/PSTN Switch Setting 10 T.38 FAX SettingNetworking StatusNetwork Setting Network SettingPPPoE Setting Ddns SettingVID Vlan SettingNAT Router Sntp SettingDMZ Setting NAT SettingService Domain SIP settingPort Setting Codec Setting Dtmf Setting Stun SettingCodec ID Other Setting RPort SettingAuto Config Firmware upgradeIPS-2000 Series User’s Manual/使用手冊 Others Auto update Auto Update Advanced Setting Default SettingFXO & FXS port System Auth Save Change RebootHttp / Tftp / FTP IPS-2000 Series User’s Manual/使用手冊 Product SpecificationsHow to use the Hold function? Dial plan set example IPS-2000 Series User’s Manual/使用手冊 How to switch with multi-account? Mailsales@kinyo.com.tw Kinyo Mailsales@kinyo.com.tw ARTDio 產品特性 產品介紹 包裝內容產品示意圖 介面說明(適合 IPS-2000 Plus) 快速安裝IPS-2000 Series User’s Manual/使用手冊 介面說明(適合 IPS-2000N Plus) 設備安裝 環境設定(適合 IPS-2000 Series)ISP 環境 建議接法 此接法將 IPS-2000 Series 置於 Adsl 數據機及 PC 之間, 最適合只 註冊登入 STATUS(狀態指示)燈號說明適合 IPS-2000 Plus 3 快速啟動註冊說明 步驟 1 快速啟動 STATUS(狀態指示)燈號說明適合 IPS-2000N Plus步驟 2 設定網路 步驟 3 快速登入註冊頁面,按下 按鈕儲存所有設定,設備重新啟動,設定成功。 IPS-2000 Series 的上下車功能 電話機狀態設定IPS-2000 Series User’s Manual/使用手冊 IPS-2000 Series 上下車的操作步驟 步驟 1 註冊帳號步驟 2 開啟上下車 Phone Setting(話機設定) 網頁設定Information(系統資訊) Phone Book(電話簿) Auto Answer (自動應答) Drop Prefix Replace rule1 Auto Dial Time Submit Reset Dial Plan Setting(撥號規則)Call Waiting(來電等待) Forward Setting(電話轉接)Call Waiting Submit Reset DNS Setting(來電拒接)Flash Time Setting(閃切設定) Volume Setting(音量設定)VoIP/PSTN Switch Setting(VoIP/PSTN 切換功能鍵設定) 10 T.38 FAX Setting(傳真設定)Networking(網路) Status(網路狀態)Network Setting(網路設定) Mask Ddns ID, 簡稱 Vlan ID 或 VID。 NAT Router(NAT 路由器設定) Service Domain(平台設定) SIP setting(SIP 設定)註冊狀態,Registered 為註冊成功,Not Registered 為註冊失敗。 Port Setting(埠號設定)Codec Setting(語音編解碼設定) Dtmf Setting Stun Setting Others(其他設定) Auto Config(自動設定)Auto Update(自動升級韌體) Firmware upgrade(韌體升級)Auto Update Default Setting(回復出廠設定值) Advanced Setting(進階設定) FXO & FXS port(FXO/FXS 設定) IPS-2000 Series User’s Manual/使用手冊 Save Change(儲存設定) Reboot(重新啟動)語音介面 產品規格區域網路介面 電話機介面常見問題與排解(Q&A) 11.速撥鍵SPEED Dial 要怎麼用? 10.如何操作三方會議?IPS-2000 Series 支持什麼類型的電話機? Dial plan 設定範例14. 如何多個 SIP 平台切換? Auto Update 如何設定? 範例說明 IPS-2000 Series User’s Manual/使用手冊 Mailsales@kinyo.com.tw Kinyo Mailsales@kinyo.com.tw ARTDio