AT&T 240 user manual Storing a Pause in a Memory Number, Storing Memory Numbers

0240_Book_1ATTa_rev 3/25/02 9:27 AM Page 13

TELEPHONE MEMORY

3Storing a Pause in a Memory Number

1 Lift the handset.

2 Press and release once to store a

2.6-second pause in the dialing sequence, twice for a 5.2-second delay, three times for a 7.8-second delay.

NOTE: Each 2.6-second pause counts as one digit when storing numbers in telephone memory.

4Storing Memory Numbers

1 Lift the handset.

2 Press and release P.

3 Dial the telephone number (up to 32 digits)

—OR —

Press Rto store the last number dialed from this phone.

4For one-touch dialing, press and release the memory button where you want to store the number (locations M1 , M2 , and M3 )

— OR —

For two-touch dialing, press m, then press the number button (0–9) where you want to store the number.

NOTE: Press on the back of the handset while storing a memory number to exit programming.

NOTE: If you try to enter more than 32 digits in a memory number, you will hear an error tone. You can then finish storing the number in

a memory location or press to exit and start again.

13