AltiGen comm 600 manual System & Network Requirements, System Requirements

Page 15

C H A P T E R 2

System & Network Requirements

System Requirements

•AltiWare OE 4.5A or higher

Note: A lower version of AltiWare may cause the IP phone to lose several advanced features, resulting in use as a very basic H.323 phone.

•AltiGen OE 4.5A Gatekeeper or higher (to support Plug and Play functionality)

Network Requirements

•Network connection — the IP phone must have TCP/IP connection to the related AltiWare system

Important:Make sure a switch is used, rather than a hub, in the corporate LAN.

•DHCP Server (to get dynamically IP address when necessary)

•TFTP Server (to update the IP phone firmware when necessary)

•GATEKEEPER (for Plug and Play feature)

AltiAdmin/ACM Admin Configuration Requirements

•The Alti-IP 600 requires a virtual extension to be created as an IP extension in AltiAdmin to handle call processing. Refer to the “Setting Up IP Extensions” chapter in the AltiWare OE/ACC System Installation & Administration Manual or ACM System Administration Manual for detailed instructions on how to set up an IP Extension to manage the IP phone.

•The IP Phone settings must be pre-configured in AltiAdmin/ACM Admin before setting up configuration for the Alti-IP 600.

Alti-IP 600 Manual 5

Image 15

Contents Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600 Manual What The Warranty Covers WarrantyEffect of State Law An Overview of the Alti-IP 600, provides an overview System and Network Requirements describes configurationPreface About This Manual OverviewRelated Documentation A P T E R An Overview of the Alti-IP Lamp Field key, an AltiServ feature code, a speed Icom New in Version Level Hardware ComponentsNetwork Requirements AltiAdmin/ACM Admin Configuration RequirementsSystem & Network Requirements System RequirementsNormal Operation AltiGen IP Phone ServicePlug and Play Feature Basic ModeAltiWare Server IP Address InstallationManual Setup Network SetupAlti-IP 600 Manual Parameter Description Tftp Apply To Button Set Up Alti-IP 600 ConnectionsConfiguring the AltiWare IP Settings Configuring Startup Network SettingsActivate the IP Extension Plug and Play SetupPlug and Play Setup After IP Phone is Started Plug and Play Setup Before IP Phone is StartedRemote Installation Alti-IP 600 Manual Verifying the Phone Startup Process Resolving Errors Upon StartupDialing an IP Number Directly from the Alti-IP Restoring Default SettingsRebooting the Alti-IP Configuring Phone Setting Soft KeysOperation Notes Alti-IP 600 Manual System Settings Configuring Phone SettingsNetwork Settings Modifying Dhcp Settings Enabling DhcpDisabling Dhcp Scroll to Local Address Configuring IP SettingsAssigning a Local IP Address Assigning a Tftp ServerUpdating Phone Firmware Configuring NAT Setting Ring Tones Assigning NATPress * * 6 Enter Distinctive Ringing Support Workgroup Status DisplayNetwork, then press the Enter button Activity DisplayAlti-IP 600 Manual Phone Functions Feature Description Configuration NotesTo AltiGen IP Phone Enter Then, go to AltiGen IP Phone Appendix a SpecificationsTCP UDP Firewall ConsiderationsProblem/Symptom Solution TroubleshootingTroubleshooting Local Menu Configuration Messages LCD MessagesAlti-IP 600H/600PH Running Messages LCD Messages User Reference IP Phone Boot MessagesUser Reference BLF Feature Codes Answering Calls Alti-IP 600 Manual Dual Tone Multi Frequency see Dtmf GlossaryAlti-IP 600 Manual Alti-IP 600 Manual Alti-IP 600 Manual Alti-IP 600 Manual Alti-IP 600 Manual Index DSL Alti-IP 600 Manual