AltiGen comm 600 manual To AltiGen IP Phone

Page 42

Conference

Initiates a conference and

• Single Call Waiting, Multiple Call

(CONF)

adds in other parties one at

Waiting or Live Call Waiting must

a time.

be enabled in AltiAdmin/ACM

 

 

 

Admin in order to conference

 

 

incoming calls.

 

 

• The user who first initiates the

 

 

conference call can select another

 

 

conference member’s call and drop

 

 

it from the conference simply by

 

 

disconnecting the call. If the

 

 

conference initiator hangs up, this

 

 

feature becomes unavailable to all

 

 

other conference members.

 

 

 

Display

Displays the workgroup

• From AltiAdmin/ACM Admin, go

Workgroup

status of the user in the

to AltiGen IP Phone

Status

LCD

Configuration on the

 

 

Management Menu, go to the

 

 

desired extension, and select the

 

 

Display Workgroup Status check

 

 

box.

 

 

 

Flash

Signals PBX that special

• By default, the lower left Soft Key

 

instructions will follow.

is set up as FLASH. This can be re-

 

 

assigned in AltiAdmin through the

 

 

AltiGen IP Phone Configuration

 

 

window. Only this key can be

 

 

configured as FLASH.

 

 

 

Headset

When selected, the user

• By default, the lower right Soft key

 

will be able to activate a

is set up as Headset. From

 

third-party handset

AltiAdmin/ACM Admin, go to

 

(certified by AltiGen)

AltiGen IP Phone Configuration

 

 

on the Management Menu, go to

 

 

the desired extension, and set the

 

 

lower right soft key (#10) to

 

 

Headset.

 

 

 

Alti-IP 600 Manual 32

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600 Manual Warranty What The Warranty CoversEffect of State Law Overview System and Network Requirements describes configurationPreface About This Manual An Overview of the Alti-IP 600, provides an overviewRelated Documentation An Overview of the Alti-IP A P T E RLamp Field key, an AltiServ feature code, a speed Icom Hardware Components New in Version LevelSystem Requirements AltiAdmin/ACM Admin Configuration RequirementsSystem & Network Requirements Network RequirementsBasic Mode AltiGen IP Phone ServicePlug and Play Feature Normal OperationNetwork Setup InstallationManual Setup AltiWare Server IP AddressAlti-IP 600 Manual Parameter Description Tftp Set Up Alti-IP 600 Connections Apply To ButtonConfiguring Startup Network Settings Configuring the AltiWare IP SettingsPlug and Play Setup Activate the IP ExtensionPlug and Play Setup Before IP Phone is Started Plug and Play Setup After IP Phone is StartedRemote Installation Alti-IP 600 Manual Resolving Errors Upon Startup Verifying the Phone Startup ProcessConfiguring Phone Setting Soft Keys Restoring Default SettingsRebooting the Alti-IP Dialing an IP Number Directly from the Alti-IPOperation Notes Alti-IP 600 Manual Configuring Phone Settings System SettingsNetwork Settings Modifying Dhcp Settings Enabling DhcpDisabling Dhcp Assigning a Tftp Server Configuring IP SettingsAssigning a Local IP Address Scroll to Local AddressUpdating Phone Firmware Configuring NAT Setting Ring Tones Assigning NATPress * * 6 Enter Workgroup Status Display Distinctive Ringing Support Activity Display Network, then press the Enter buttonAlti-IP 600 Manual Feature Description Configuration Notes Phone FunctionsTo AltiGen IP Phone Enter Then, go to AltiGen IP Phone Specifications Appendix aFirewall Considerations TCP UDPTroubleshooting Problem/Symptom SolutionTroubleshooting Local Menu Configuration Messages LCD MessagesAlti-IP 600H/600PH Running Messages LCD Messages IP Phone Boot Messages User ReferenceUser Reference BLF Feature Codes Answering Calls Alti-IP 600 Manual Glossary Dual Tone Multi Frequency see DtmfAlti-IP 600 Manual Alti-IP 600 Manual Alti-IP 600 Manual Alti-IP 600 Manual Alti-IP 600 Manual Index DSL Alti-IP 600 Manual
Top Page Image Contents