Your 7402 Plus Voice Terminal

Conference Ring

Drop Test

Your 7402 Plus Voice Terminal

The 7402 Plus voice terminal is designed so you can conveniently use the many features of the AT&T DEFINITY® Communications System Generic 2 and System 85. Familiarize yourself with your voice terminal, shown in Figure 1 below and explained on the following page.

Figure 1. 7402 Plus Voice Terminal

Starting at the top of Figure 1 and continuing clockwise:

Handset

Call appearances/ feature buttons

Speaker/headset adapter

jack (on back of voice terminal)

Line jack

(on back of voice terminal)

Select button

Transfer button

Hold button

For placing and answering calls. In most cases, you must lift the handset (go off-hook) before you can use a feature. Also known as the receiver.

For handling incoming and outgoing calls (call appearances), labeled with extension numbers. For accessing features (feature buttons), labeled with feature names.

For connecting an external speaker or headset adapter

to your voice terminal. Located on the back of your
voice terminal near the center, and is labeled	.

For connecting a line cord to your voice terminal. Located on the back of your voice terminal just to the right of the center, and labeled ‘‘LINE.’’

When used with you can test the lights and ringer on your voice terminal. When used with

you can select a personalized ring from among 8 available patterns.

For transferring a call to another voice terminal.

For putting a call on hold.