2402_map_2ATT 5/7/02 6:32 PM Page 2
C H A R G E T H E B A T T E R Y
1Install the handset battery pack.
Use only the battery supplied with this handset or AT&T Accessory Battery Model 2401, SKU#91077.
a)Remove battery compartment
cover by pressing on indentation and sliding downward.
b) Place the battery pack in the handset. Match the metal contacts on the battery with the contacts in the battery compartment.
c)Replace cover by sliding it on its track up over battery case until it snaps firmly into place.
•When you install the battery pack the first time, the handset will display ENTER BASE ID.
2Charge the handset battery.
•Place the handset in the remote charging stand (purchased separately). The CHARGING light goes on.
•Charge the battery at least 12 hours. After the first charge, the battery typically charges in only eight hours.
2