AT&T ATCL2909 user manual Installation options, Tabletop installation, Check the mounting bracket

Page 11

DSL filter (not included) is required if you have DSL high-speed Internet service. The DSL filter must be plugged into the telephone wall jack.

Telephone wall jack

Getting started

Installation options

The telephone base comes with the mounting bracket already installed for tabletop use. If you want to mount your telephone on a wall, use the provided wall bracket to connect with a standard dual stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronic retailers. You might need a professional to install the mounting plate.

If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter (not included) between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.

Tabletop installation

Follow the instructions below to install your telephone to tabletop position.

1. Check the mounting bracket.

The telephone’s mounting bracket is positioned for tabletop use. Make sure it is secure by pressing the two feet.

2. Connect one end of the telephone line cord to the jack labeled TEL on the back of the telephone.

Telephone line cord

3. Connect the other end of the line cord into a telephone jack or a DSL filter.

Image 11

Contents User’s manual Congratulations Not included Make sure to install fourAA alkaline batteries InstructionsParts checklist Table of contents Index Caller ID operationProduct overview Remove Quick reference guideDisplay screen messages Base lightsScreen icons Battery installation Check the mounting bracket Installation optionsTabletop installation Check for dial tone Connect the handset to the telephoneReposition the mounting bracket for wall use Wall installation Reverse the handset tabConnect the telephone line cord to a wall jack Route the telephone line cordMount the telephone on the studs on the mounting plate Follow steps 4-5 in Tabletop installation onSet contrast Telephone settingsLanguage selection For calls within your area code You dial Enter in step Set home area codeYou can program up to four local area codes Set local area codeSet time and date Set remaining featuresFeature summary Default settings indicated by Telephone operation From a speed dial location Chain dialingMute Flash/call waitingHold To return to the callCall info Ringer volumeSpeed dial overview Speed dialStore a number in a speed dial location Delete a speed dial entry Dial a speed dial number Using handset or speakerphoneUsing Display Dial Review a speed dial entryDirectory memory capacity Directory operationStore numbers and names in the directory Delete a directory entry Review directory entries on thisReview directory entries Dial a directory numberCaller ID information Caller ID operationInformation about call history Review call history Caller IDDisplay dial Remove all call recordsPrivate Name Dialing optionsTroubleshooting Screen incorrectly displays Line in USE Caller ID isn’t workingNo caller ID information while on a call Display dial does not workTroubleshooting Maintenance Important safety information Repair instructions FCC and Acta informationProduct identifier and REN information Connection and use with the nationwide telephone networkHearing aid compatibility Rights of the telephone service providerProgramming/testing of emergency numbers Part 15 of FCC rules How long is the limited warranty period? Limited warrantyWhat does this limited warranty cover? How do you get warranty service? Other limitations Technical specifications Index Error Present