AT&T ATCL2909 user manual Base lights, Screen icons, Display screen messages

Getting started

Quick reference guide

Base lights

SPEAKER

On when speakerphone is in use.

MUTE

On when speakerphone or handset microphone is muted.

LOWER

CALL INFO

•On when the line is in use.

•Flashes slowly when a call is on hold.

-OR-

When the connected telephone line cord is not plugged into a wall jack.

-OR-

When the telephone on the same line is in use.

•Flashes quickly when there is an incoming call.

Screen icons

12:00AM 1-01

ERR

LOWER

NEW
No:REP	00	LOWER
0 CALLS		0 NEW

	There is an error in the caller ID information.
ERR
	Line is in use or the connected telephone line cord is
	not plugged into a wall jack.
NEW	The caller ID information has not been reviewed.
REP	A person from this number has called more than once.
LOWER	The lower speed dial location is active.
NO:	The position of the number stored in call history.
	The battery power is low.
	The ringer volume is set to OFF.

Display screen messages

Displays	Means
STORED	The telephone number displayed is stored.
DELETED	• All entries stored in the call history have been deleted.
	• The last number dialed has been deleted.
END OF LIST	You have reached the end of the call history records.
DIRECTORY EMPTY	There are no telephone numbers stored in the directory.
NO NAME FOUND	There are no names matching the letter combination you have selected.
NO NUMBER	There is no entry stored in the speed dial location you have selected.
LINE IN USE	The connected telephone line cord is not plugged into a wall jack or
	another telephone on the same line is in use.
LINE RINGING	There is an incoming call.
LINE ON HOLD	The line is on hold.
MEMORY FULL	The directory is full.
ONLY 24 ALLOWED	The number you have entered in the directory or speed dial memory is
	over 24 digits.
ONLY 15 ALLOWED	The name you have entered in the directory is over 15 characters.
CHECK BATTERY	There are no batteries installed or you need to replace the old batteries.