AT&T ATCL2909 user manual Store numbers and names in the directory

Page 29

Directory

LOWER

LOWER

Directory operation

Store numbers and names in the directory

1.Press DIRECTORY, then press CALL LIST or CALL LIST to scroll to STORE.

2.Press OPTIONS and the screen displays ENTER NUMBER.

3.Enter the telephone number (up to 24 digits) you want to store. Press CALL LIST to backspace and make corrections.

-OR-

Press REDIAL to store the last number dialed (up to 24 digits).

4.Press OPTIONS, and the screen displays ENTER NAME.

5.Use the character chart on page 22 to enter a name (up to 15 characters). Press CALL LIST to backspace and CALL LIST to advance or add a space. The screen automatically returns to idle mode if you do not press a dial pad key within 15 seconds.

6.Press OPTIONS to store the name and number.

NOTE: If the number you entered is over 24 digits, the screen displays ONLY 24 ALLOWED.

Store a pause or a flash in a directory number

Press CALL LIST twice to store a pause in the dialing sequence (P displays). Press FLASH to store a flash in the dialing sequence for some special services (F displays).

NOTE: To exit the directory at any time without saving changes, press CLEAR.

23

Image 29

Contents User’s manual Congratulations AA alkaline batteries Make sure to install fourInstructions Not includedParts checklist Table of contents Index Caller ID operationProduct overview Remove Quick reference guideDisplay screen messages Base lightsScreen icons Battery installation Check the mounting bracket Installation optionsTabletop installation Check for dial tone Connect the handset to the telephoneReposition the mounting bracket for wall use Wall installation Reverse the handset tabConnect the telephone line cord to a wall jack Route the telephone line cordMount the telephone on the studs on the mounting plate Follow steps 4-5 in Tabletop installation onSet contrast Telephone settingsLanguage selection For calls within your area code You dial Enter in step Set home area codeYou can program up to four local area codes Set local area codeSet time and date Set remaining featuresFeature summary Default settings indicated by Telephone operation From a speed dial location Chain dialingHold Flash/call waitingTo return to the call MuteCall info Ringer volumeSpeed dial overview Speed dialStore a number in a speed dial location Using Display Dial Dial a speed dial number Using handset or speakerphoneReview a speed dial entry Delete a speed dial entryDirectory memory capacity Directory operationStore numbers and names in the directory Review directory entries Review directory entries on thisDial a directory number Delete a directory entryCaller ID information Caller ID operationInformation about call history Review call history Caller IDDisplay dial Remove all call recordsPrivate Name Dialing optionsTroubleshooting No caller ID information while on a call Caller ID isn’t workingDisplay dial does not work Screen incorrectly displays Line in USETroubleshooting Maintenance Important safety information Product identifier and REN information FCC and Acta informationConnection and use with the nationwide telephone network Repair instructionsHearing aid compatibility Rights of the telephone service providerProgramming/testing of emergency numbers Part 15 of FCC rules How long is the limited warranty period? Limited warrantyWhat does this limited warranty cover? How do you get warranty service? Other limitations Technical specifications Index Error Present