AT&T 7406 manual Priority Calling, Reset Speakerphone

Priority Calling

To place a priority call	1	Press [ Priority ]
(3-burst ring)		or Dial Priority Calling code
			[dial tone]
	2	Dial the extension
		Note: If your call is not answered and you wish to
		redirect it to coverage, press [ Go to Cvr ] while call is
		ringing.
To change a regular call	1	Press [ Priority ]
into a priority call (when	2	Wait for called party to answer
you hear a call waiting
ringback tone)		Note: If you still receive a call waiting
		ringback tone, wait a few minutes and try again.

Reset Speakerphone

You can adjust the speakerphone to the surrounding room acoustics to provide optimal performance. Use the Reset Speakerphone feature in the following ways:

●Whenever you move your voice terminal to another place (even in the same room)

●Whenever the green light next to [ Speaker Reset Spkr ] is fluttering

Note: You may also use this feature when you are on a call in the unlikely event that your speakerphone makes a squealing noise during the call. When you press [ Select ] and [ Speaker Reset Spkr ] , your speakerphone will adjust itself to normal for that call. (No tones will be heard.)

Important: If there has been a interruption in power (such as, the system has just been powered up again, or you have plugged in the voice terminal at another location), the light next to [ Speaker Reset Spkr ] flutters until you reset the built-in speakerphone.

You can initiate the Reset Speakerphone feature when your handset is on-hook, or during a call in which you are using the built-in speakerphone. (If a call is in progress, you will not hear the tones, and the new speakerphone adjustment is reset for only the duration of that call.)

Remember that you can use the Reset Speakerphone feature only if your voice terminal is set for the Speakerphone feature (as opposed to the Speaker feature).

21