AT&T 7406 manual Message light

9)Two-level feature buttons

10)Volume control button

11)Select button

12) Transfer button

13) Dial pad

14)Hold button

15)Drop/Test button

16)Conference/Ring button

17)Message light

Each of these 6 buttons accesses 2 features, one printed on the top half of the label and one printed on the bottom half of the label. You can access the top feature by pressing [ Select ] and then the feature button.

For adjusting the volume of the built-in speakerphone when you are using the speakerphone and a call is in progress, or for adjusting the volume of the tone ringer when you are not using the speakerphone.

Can be used in 4 different ways:

1)Used with a 2-level feature-button to access the top-labeled feature;

2)Used with [ Drop Test ] , to initiate a self-test of your voice terminal;

3)Used with [ Conference Ring ] , to select your own personalized ring from among 8 available patterns;

4)Used with [ Speaker Reset Spkr ] , to perform an

acoustic test of the environment and adjust the speakerphone to the surrounding acoustic environment for optimal performance.

For transferring a call to another voice terminal.

The standard 12-button pad for dialing phone numbers and accessing features. The letters, "Q" and "Z," have been added to the appropriate dial pad keys for directory access, and the "5" button on your dial pad has raised bars for visually-impaired users.

For putting a call on hold.

For disconnecting from a call or dropping the last party added to a conference call. When used with [ Select ] , you can perform a self-test of your voice terminal button lights and tone ringer.

For setting up conference calls. When used with

[ Select ] , you can select a personalized ringing pattern for your voice terminal.

A red light which goes on steadily when a message has been left for you.

3