INSTALLATION
Battery Installation
This telephone requires four AA batteries (not included) in order for the caller ID with call waiting, memory, and new call light to work. For best results, use alkaline or heavy duty batteries.
1.Press on the tab to open the cover of the battery compartment.
2.Install four new AA batteries (not included) in the battery compartment according to the diagrams engraved in the compartment.
3.Close the battery compartment cover and make sure it is secured.
NOTES:
• When the batteries are installed, the screen will show 12:00 and the clock will begin to run. It will reset to the correct time when the first caller ID data is received.
• Always disconnect all telephone lines from the wall outlets before replacing batteries.
•Install new batteries every six months to maintain the call log and telephone memory.
• Do not mix old and new batteries and
•Do not mix alkaline, standard
•Information, including caller ID, Speed dialing memories, redial, and settings will be maintained for about 10 minutes during battery replacement.Numbers stored in memory will be lost if the telephone is unplugged from the jack
for over 10 minutes when there are no charged batteries installed. Please change the batteries soon after the Low Battery icon (
) appears.